11901 Results for "《 예약문의 OIO↗8489↗8306》가라오케┦가라오케world선릉가라오케가라오케사이즈청담가라오케promotion 선릉가라오케┫ ∫선릉가라오케decided"

Lichee Zero u-boot Getting Started!
Project by NYH-workshop
What to do with a little SoC and an SD-card? Let's start with a little bit of u-boot!
- 2
- 1

CC68 : An ANSI C Cross Compiler for the 6800/3/303
Project by EtchedPixels
CC68 is a mostly ANSI C compiler targetting the 6800 series processors derived from the cc65 code base
- 9
- 7

SDR LimeToGo
Project by Djani
Remote RX SDR set built to be left outside for radio signal monitoring
- 9
- 8

Starburst
Project by Dr. Cockroach
A little bit of Led art using a light Logic sequencer
- 5
- 7

Handheld High Power Water Scooter
Project by Peter Buckley
A small handheld water mobility device which uses a water jet that is portable, lightweight, and powerful .
- 9
- 8

OpenLRC - The low cost linear rails CNC
Project by Peter Buckley
Open source CNC project which uses cheap linear rails from china, and aluminum C profiles for modularity and rigidity.
- 8
- 4

Odometry Module, in partnership with JLCPCB
Project by Robotech Nancy
Story Robotech Nancy is a project located in Polytech Nancy, engineering school. Its goal is to compete at the French Cup of Robotics
- 0
- 0

YatDB
Project by Franck GALLIAT
YatDB is a Teensy 3.6 Dev Board that runs CP/M (custom)
- 1
- 1

Bottango
Project by Evan
Animation for Robots
- 14
- 10

Universal ESP-WiFi-device flasher
Project by Turo Heikkinen
Quick and easy way to flash all those WiFi switches/sensors/whatever.
- 8
- 5

Geodatalogger for gas concentrations
Project by j
8 differen gas concentrations with air-pressure, humidity and temperature compensation with GPS-location
- 2
- 2

68HC11 CPU Board for RC2014
Project by EtchedPixels
Another processor card for the RC2014 bus
- 10
- 10

JamLoopy for Atari VCS
Project by Zden Hlinka
JamLoopy is 64 steps note looper for Atari 2600. Notes are either represented musically or treated as bare data for VCS’s audio registers.
- 6
- 6

DIY hobby servos quadruped robot
Project by Miguel Ayuso Parrilla
Cheap 3D printed 4 legged robot, that almost looks like boston dynamics spot but moves like a newborn.
- 2.8k
- 596

Le-Sk8te - Foldable electric longboard
Project by Lucas
Electric foldable longboard for micro-mobility and commuting
- 8
- 6

1
2
3
4
5
>
>|