Close

27106 Results for "《 예약문의 OIO↗8489↗8306》선릉레깅스┛Еimportanceム강남레깅스룸레깅스룸ㅂheavenly 레깅스룸강남레깅스 강남레깅스룸⊥선릉레깅스ゥfiercelyり"

  • TI-84+ SE Backlight
  • Instructions     from TI-84+ SE Backlight
  • Use hot glue to mount the inverter and push button in the back half of the case. Fortunately theres lots of space inside the TI. Use lots of glue so the button stays in place when you push it.

  • TI-84+ SE Backlight
  • Instructions     from TI-84+ SE Backlight
  • Solder the - wire from the inverter to the - lead on the battery case. The inverter needs 3V, not 6V, so solder the + wire to the connector going between the second and third AA.

  • TI-84+ SE Backlight
  • Instructions     from TI-84+ SE Backlight
  • Finally you can put the two halves back together. Plug in the EL panel and arrange all the wires so they don't get pinched. Snap the two halves of the case together.Before you screw everything together, put the batteries in and make sure it all works....

  • TI-84+ SE Backlight
  • Instructions     from TI-84+ SE Backlight
  • Now its time to take apart the inverter. Clip off the spring and solder some wires onto the battery contacts. The inverter will be powered by two of the calculator's AAs.The inverter has two buttons, but they both do the same thing. Desolder the button...

  • DIY SlingBox $30
  • Instructions     from DIY SlingBox $30
  • Server Controls:The real tricky part here is starting VLC from the web, as a user, that will allow outside connections.My solution was to configure Apache to have user pages. I then placed the server controls in /home/username/public_html/cgi-binhttp://httpd.apache.org/docs/2.2/howto/public_html.html...

  • DIY SlingBox $30
  • Instructions     from DIY SlingBox $30
  • VLC:Live transcoding is resource intensive, making it nice to be able to turn it on and off. Also switching the VLC configurations allows for many variations of size and quality, useful in tailor the stream to different devices and scenarios. Below are...

  • DIY SlingBox $30
  • Instructions     from DIY SlingBox $30
  • LIRC Web Interfacehttp://home.comcast.net/~tomhorsley/wisdom/lirc/lirc.htmlI re-purposed Tom's code to run my VLC server commands as well.

  • DIY SlingBox $30
  • Instructions     from DIY SlingBox $30
  • This is the code I used for the right frame in the first picture.#!/usr/bin/perl#use CGI qw/:standard/;use URI::Escape;my $cols = 3;my %button_codes;$button_codes{'1'}='BTN_1';$button_codes{'2'}='BTN_2';$button_codes{'3'}='BTN_3';$button_codes{'4'}='BTN_4';$button_codes{'5'}='BTN_5';$button_codes{'6'}='BTN_6';$button_codes{'7'}='BTN_7';$button_codes{'8'}='BTN_8';$button_codes{'9'}='BTN_9';$button_codes{'0'}='BTN_0';$button_codes{'Ch-'}='KEY_CHANNELDOWN';$button_codes{'Ch+'}='KEY_CHANNELUP';if...

  • DIY SlingBox $30
  • Instructions     from DIY SlingBox $30
  • And this is the left frame. flowplayer href="http://xxx.xxxxxx.org:8080/stream.flv" style="display:block;width:320px;height:240px" id="player"> flowplayer("player", "flowplayer-3.2.11.swf");

  • DIY SlingBox $30
  • Instructions     from DIY SlingBox $30
  • Check Server Status:#!/bin/sh##echo "Content-type: text/plain"echo "Content-type: text/html\n"echo ""echo "Check Server"echo ""if ps -C vlc > /dev/nullthen echo "VLC is running"else echo "No server found"fiecho ""echo "Back"echo ""echo ""

  • DIY SlingBox $30
  • Instructions     from DIY SlingBox $30
  • #!/bin/bash##recording1.shirsend SEND_ONCE --count=2 radioshack BTN_4irsend SEND_ONCE --count=2 radioshack BTN_6mencoder tv:// -tv driver=v4l2:norm=NTSC_M:width=720:height=480:outfmt=uyvy:device=/dev/video0:input=0:fps=25:buffersize=16:alsa:amode=1:forcechan=2:audiorate=48000:adevice=plughw.1,0:forceaudio:immediatemode=0...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday