Close

24373 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》레깅스룸견적よ레깅스룸ago레깅스룸メ강남레깅스룸eighty 선릉레깅스룸κ선릉레깅스⒲레깅스룸メｃ선릉레깅스룸literary"

  • Terminadog
  • Details     from Terminadog
  • ConstructionThe helmet is made from cardboard with aluminium foil and tape. A red LED is hot glued on a glass sphere for the eyepiece, which came from a japanese limonade bottle . The blue tint of the glass have a nice touch on the eyeball look whether...

  • macr0
  • Details     from macr0
  • The PCB was designed with KiCAD and fabricated by JLCPCB.  Components are all SMD except for the key-switches, LEDs, USB-C connector and ISP header.Firmware was coded in C and drew from Dean Camera's LUFA library.The "enclosure" consists of a spotted...

  • bidirisns
  • Details     from bidirisns
  • This is a compact current sense amplifier board based on the INA190 from TI. Three current sense resistors are placed in series so it can provide 3 different current ranges depending on which pins are used.  The middle resistor should be used for...

  • Bye Bye 2020
  • Details     from Bye Bye 2020
  • The seven of us couldn't be happier to say bye bye to 2020. Through this international and physically distant collaboration, we used the internet to trigger the destruction of six small parts of 2020. Here you'll find information about each of the themed...

  • 6502 Computer runs calculator
  • Details     from 6502 Computer runs calculator
  • 1. Hardware This calculator is configured with a numpad unit connected to the computer shown in the project “6502 standalone computer". The numpad unit consists of an LED display (HCMS-2972, BROADCOM) and a key matrix as shown in the circuit diagram....

  • Movie Magic Hack Chat
  • Details     from Movie Magic Hack Chat
  • Alan McFarland will host the Hack Chat on Wednesday, January 20 at noon Pacific Time. Time zones got you down? Here's a handy time converter! If they were magically transported ahead in time, the moviegoers of the past would likely not know...

  • 3D-printable shredder
  • Details     from 3D-printable shredder
  • To drive the shredder i used the gearbox i mentionned above. Project can be found here: https://hackaday.io/project/173854-3d-printed-high-torque-servogearbox-version-2 The gearbox was powered by a 3S 2200mah LIPO battery with the help of the Universal...

  • Binary Clock Shield for Arduino
  • Details     from Binary Clock Shield for Arduino
  • FEATURES & COMPONENTS Designed for Arduino UNOOperating voltage: 5 V via Arduino (USB or 7-12 VDC jack)Dimensions: 68.6 x 53.4 mmRTC – Real Time Clock on board DS3231Piezo Buzzer – can play tones and music – KLJ-123017 RGB LEDs – WS2812BBattery...

  • reTIL
  • Details     from reTIL
  • Overview Replica of TI's TIL311 one digit hexadecimal display Discrete 0402 LEDs Cheap STM8S Micro controller This MCU is 5V compatible - this is nice to maybe get it as drop-in replacement for TIL311 Compared to TIL311 much lower supply current - around...

  • NPR-H New Packet Radio Modem
  • Details     from NPR-H New Packet Radio Modem
  • Back in the 1990s the TNC2Q got famous for packet radio. TNC2Q which was build by DF9DQ and distributed by OV O28 in those days. As a member of O28 I was in the lucky position to build one TNC2Q my own. That was the start of my ham radio hobby. "More...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday