90479 Results for "《〈 문의 OIO↗5793↗7458 》〉 강남셔츠룸っ 셔츠룸가격conspicuous셔츠룸후기선릉셔츠룸셔츠룸solid 셔츠룸가격│Æ셔츠룸후기derivative"

1728 leds is a lot more data than you think
Log from FLED
In the original FLED implementation we had a Raspberry Pi inside the case. This Pi ran a NodeJS application that executed the animation code written in JavaScript and provided a web interface for users to create animations within. This all worked fairly...

Success!
Log from FLED
After much soldering....and a little debugging we managed to get the array lit up.If you look carefully you can see the grounding braid we used as a power and ground bus at either end of the strips. We then simply hooked up data and clock (these are...

Some assembly photos
Log from FLED
We still haven't had time to finish this off completely yet. We do have the driving system working, but its not yet stable and its not yet in the box.In the meantime we figured we'd post some more assembly photos. So here's Jasmine...laying out 1758...

It's alive!
Log from FLED
Finally, after much fiddling around, the upgrade to FLED is operational.We're now running a grand total of 1768 LEDs, in a 52x34 configuration. The setup is a Beaglebone Black connected to an RGB-123 48 output cape. The cape level shifts the Beaglebone...

Animations!
Log from FLED
So after you have a working LED matrix, you can't stop there. Otherwise you just have a big display running strandtest and that frankly just sucks.We built a Javascript animation engine that we use to drive the display, this runs NodeJS which allows...

The Design And Construction Of A Backplane
Log from MC68000 Computer
This entire project is a little bit of an odd bird. In terms of electronic sophistication, it’s not too different than any of the other homebrew computers you might see on Hackaday. This isn’t a project that will just sit on my workbench until I die...

Power And Reset Circuits
Log from MC68000 Computer
Since we're using an ATX power supply for this computer, there is a little magic that needs to happen before it becomes a proper power supply. Besides the usual orange, red, yellow and black wires attached to a 20-pin connector, there are also a few...

Theory of a CPU module
Log from MC68000 Computer
Compared to the 8080, the Z80, the 6809, 6502, and all the other 8-bit microprocessors used in boxxen of yore, the CPU I’m using for this project - the Motorola 68000 is both extremely powerful and extraordinarily complex. The power comes from a huge...

Theory of RAM and ROM modules
Log from MC68000 Computer
Although it might make sense to start this project by building a CPU module first, I decided it would make more sense to start with the memory for this system. This serves two purposes: as an explanation of how the 68000's memory-mapped I/O works, and...

BLINKENLIGHTS
Log from MC68000 Computer
This is something I've written about in a front page Hackaday post, but I think it's time to go over a little more of the theory of what I'm doing here. First, a video:This is called freerunning the processor. Basically, it executes one instruction,...

A Long, Long Overdue Update
Log from MC68000 Computer
Quick story. I brought this computer to the Vintage Computer Festival 9.1 last year to show Bil, Dave, and all the other cool people at the event. At the time, I was freerunning the processor, watching the blinkenlight count up. Great stuff, and proof...

You can refactor hardware, right?
Log from MC68000 Computer
I'm in the middle of a few free days right now, and I figured it's time to take a look at this project. Things aren't good. Let's go over what's wrong with it:It's not doneIt's not even close to being doneThe 'not being done' is mostly a result of using...

Dev Tools
Log from "Chad" - The NFC Voting System
I'm exploring the STM32 F3 for this project:→InsertImageLinux Setup→InsertImage- Toolchain: GNU Tools for ARM→InsertImage- Bare metal template→InsertImage- OpenOCD Git repo: git://git.code.sf.net/p/openocd/code→InsertImageTexane Repo:→InsertImage-...

PN532 Reader
Log from "Chad" - The NFC Voting System
Project deadline is 17 days away.→InsertImageThe ElecFreaks PN532 based NFC reader arrived today. Had I realized that all their software samples are derived from the Adafruit board I would have ordered that one to support the open source effort (sorry...

MiFare Write/Read Success
Log from "Chad" - The NFC Voting System
Days until deadline: 16→InsertImageI still don't have the correct tag in hand yet (ntag203). But today I was able to write an NDEF formatted message to the MiFare Classic tag that came witdh the NFC reader. This was all thanks to the Seeed Studio PN532...

|<
<
1
2
3
4
5
>
>|