90479 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기た《〈 문의 OIO↗5793↗7458 》〉 ⑷plenty㎋셔츠룸후기셔츠룸후기んteeth 셔츠룸후기선릉셔츠룸 강남셔츠룸￦셔츠룸ⓤsilverⓞ"

Purchased Hardware & Electronics
Log from Delta 3D Printer
In order to stick to my design goal of an AUD$1000 budget I decided to start a bill of materials spreadsheet. This would be a handy tool to keep track of budget and also allow me to show people if they wanted to try making something similar. Below is...

Day 1: Mechanism is good, no bubbles yet.
Log from Fan powered bubble machine
The goal for day 1 was to make a mechanism with LEGO studded beams and gears to convert speed from one axle (where the pinwheel will be) to strength at another axle (where the bubble wands will rotate). The mechanism completed on day one is a 1:36 ratio;...

The math didn't check out
Log from FAROSH
I made a mistake somewhere and my big gear is a few teeth short:Now I'm printing a piece which fits there.

Dynamic Interactivity Week 6
Log from Dynamic Interactivity Final Project
- i had print some different eyes ball which is fit the head.- the eyes ball it can clip it and more easy to take out.- also the mouth and teeth print one by one to stick it.

Adding mouth detail
Log from My first Fursuit - Yes I am a Furry
Started adding black felt to the inside of the mouth for Marcus. I also plan on adding a few teeth as well.

Brushing your teeth has never been easier
Log from Yasky-bot. An industrial robotic arm becomes open
What happens when you attach with a zip-tie a toothbrush to an anthropomorfic manipulator?

Third Time is a Charm?
Log from 3D Printed Chiming Clock
Okay the second version of the Escape Wheel was better than the first, but still was not a complete success. This time it was not possible to adjust the pallets to prevent the escape wheel from free running, or jamming. And of course that means that...

DMX Protocol - RS485
Log from Web Controlled DMX Interface
It turns out DMX just uses the RS485 protocol. There are a plethora of chips that can be used to communicate via RS485, so plenty of options if one doesn't work out.

FPGA Resources
Log from OpenCores PDP-8 on FPGA
Uses most of the internal SRAM. Plenty of logic space left over:

Kick-Ass Video
Log from BuckyBot
Well, since I screwed-up posting my "completed" systems design document on Sept. 28, I've decided to run amok, and present a visceral, kick'em-in-the ... uh ... teeth! ... yea, teeth! ... video as a response to the "promotional" video requirement for...

FreeCAD
Log from Open Source Underwater Distributed Sensor Network
I used FreeCAD to make all of the 3D designs. I primarily used the Part Design, Part and Mesh workbenches. My workflow was to make sketches, and pad, pocket or revolve in Part Design, then move to Part for boolean operations (for interlocking parts),...

new plier problems
Log from How lions etch PC boards
The 1st etch with PLA pliers was successful in that it was a lot easier to massage a large board, but unsuccessful in that there were still air bubbles & the pliers absorbed acid between the laminations. The acid leached up to the handle through capillary...

Dimensions
Log from Power supply power-on sequencer
The french circuit breakers have a very standardised format. I wanted to measure the actual parts but it's better to read the books and I found some informations. Crucially: the module widths are multiples of 18mm.I had to measure something anyway :...

Gear design
Log from Strain Wave Gear with Timing Belts
This is based on the design of a strain wave gear, but it not an exact copy of a strain wave gear. Strain wave gears characteristically have an oval wave generator, a flex spline cup, and a circular spline. The wave generator engages 1/3 or more of the...

Recommended Servo
Log from Smart Shoes
I recommend using this servo as it is waterproof and has enough torque.Link:- click here

|<
<
1
2
3
4
5
>
>|