Results for 『 모든문의 OIO=5793=7458 』 선릉셔츠룸㈄『 모든문의 OIO=5793=7458 』 Ηcake²셔츠룸테란강남셔츠룸デwriter 셔츠룸테란강남셔츠룸 선릉셔츠룸⒁셔츠룸사이즈┲exhausted⅔

TI-84+ SE Backlight
Instructions from TI-84+ SE Backlight
Take the new polarizer film and slide it behind the LCD. If you turn the polarizer one way, the screen will be transparrent. If you turn it the other way, the screen will be opaque. Behold the magic of polarized light!Now you have the option of inverting...

TI-84+ SE Backlight
Instructions from TI-84+ SE Backlight
Assemble your LCD sandwich with the EL panel on the back, then the polarizer, then the glass. You can use some scotch tape around the edge to hold everything in place. I used some putty to stick the whole thing to the PCB, but you could also use some...

TI-84+ SE Backlight
Instructions from TI-84+ SE Backlight
Find a good place to mount the push button that will control the backlight. I chose to put mine on the left side of the calculator, as you can see in the pictures. This was a very tight fit though. Some other suggestions would be on the top or under...

TI-84+ SE Backlight
Instructions from TI-84+ SE Backlight
Carefully bend the EL panel leads so they fold around the back of the PCB. The panel can bend pretty far, just don't crease it.Now install the board back in the front half of the case and screw it down. The EL panel leads will stick up through gap between...

TI-84+ SE Backlight
Instructions from TI-84+ SE Backlight
Drill the hole for your button with a 9/64" drill bit. It may help to put the two halves of the case back together without the guts inside.

TI-84+ SE Backlight
Instructions from TI-84+ SE Backlight
Use hot glue to mount the inverter and push button in the back half of the case. Fortunately theres lots of space inside the TI. Use lots of glue so the button stays in place when you push it.

TI-84+ SE Backlight
Instructions from TI-84+ SE Backlight
Solder the - wire from the inverter to the - lead on the battery case. The inverter needs 3V, not 6V, so solder the + wire to the connector going between the second and third AA.

TI-84+ SE Backlight
Instructions from TI-84+ SE Backlight
Finally you can put the two halves back together. Plug in the EL panel and arrange all the wires so they don't get pinched. Snap the two halves of the case together.Before you screw everything together, put the batteries in and make sure it all works....

TI-84+ SE Backlight
Instructions from TI-84+ SE Backlight
Now its time to take apart the inverter. Clip off the spring and solder some wires onto the battery contacts. The inverter will be powered by two of the calculator's AAs.The inverter has two buttons, but they both do the same thing. Desolder the button...

DIY SlingBox $30
Instructions from DIY SlingBox $30
Server Controls:The real tricky part here is starting VLC from the web, as a user, that will allow outside connections.My solution was to configure Apache to have user pages. I then placed the server controls in /home/username/public_html/cgi-binhttp://httpd.apache.org/docs/2.2/howto/public_html.html...

DIY SlingBox $30
Instructions from DIY SlingBox $30
VLC:Live transcoding is resource intensive, making it nice to be able to turn it on and off. Also switching the VLC configurations allows for many variations of size and quality, useful in tailor the stream to different devices and scenarios. Below are...

DIY SlingBox $30
Instructions from DIY SlingBox $30
LIRC Web Interfacehttp://home.comcast.net/~tomhorsley/wisdom/lirc/lirc.htmlI re-purposed Tom's code to run my VLC server commands as well.

DIY SlingBox $30
Instructions from DIY SlingBox $30
This is the code I used for the right frame in the first picture.#!/usr/bin/perl#use CGI qw/:standard/;use URI::Escape;my $cols = 3;my %button_codes;$button_codes{'1'}='BTN_1';$button_codes{'2'}='BTN_2';$button_codes{'3'}='BTN_3';$button_codes{'4'}='BTN_4';$button_codes{'5'}='BTN_5';$button_codes{'6'}='BTN_6';$button_codes{'7'}='BTN_7';$button_codes{'8'}='BTN_8';$button_codes{'9'}='BTN_9';$button_codes{'0'}='BTN_0';$button_codes{'Ch-'}='KEY_CHANNELDOWN';$button_codes{'Ch+'}='KEY_CHANNELUP';if...

DIY SlingBox $30
Instructions from DIY SlingBox $30
And this is the left frame. flowplayer href="http://xxx.xxxxxx.org:8080/stream.flv" style="display:block;width:320px;height:240px" id="player"> flowplayer("player", "flowplayer-3.2.11.swf");

27106 Results for "『 모든문의 OIO=5793=7458 』 선릉셔츠룸㈄ 『 모든문의 OIO=5793=7458 』 Ηcake²셔츠룸테란강남셔츠룸デwriter 셔츠룸테란강남셔츠룸 선릉셔츠룸⒁셔츠룸사이즈┲exhausted⅔"