Close

5624 Results for "3D printing"

  • 3D printing the shell

  • For this project, I commited pretty much any crime in design for 3D-printing. No flats, lots of overhangs, thin shell (2mm). So the only way I could print this without excessive use of support structures was cutting the design into pieces that could...
  • 3D Print

  • As this is a very first attempt at 3D printing, the results are quite nice. We used a Da Vinci Junior 1.0A that uses PLA for its prints. The first time, the two halves of the box fitted nicely, as did all the 'innards' of the box. Some minor modifications...
  • 3D Modelling

  • Next step is to model the entire robot to leave out any obvious mistakes. Sketchup is my preferred software for 3d modelling as it is simple to use and the availability of many pre-modelled components. The SketchUp file for the model is part of the files....
  • 3D printing

  • The first step was to calibrate the 3d print, magnet and motor.  Based on this test a few changes were done and the final model is attached. So next is sticking the magnets to this using some cyanoacrylate glue and giving it a quick spin.
  • 3D Printing of the arms pt.2

  • The second part of the left robot arm was printed in 3D using PLA with low density and spacing of 0.3mm between layers in a total printing time of about three hours.A segunda peça do braço esquerdo do robô foi impressa em 3D utilizando PLA com baixa...
  • 3D Printing

  • Just wrapped up an initial print for the case.Aside from a few cutouts internally, I didn't end up needing to do much fettling to get things to fit. Next up - wiring up the 2nd unit and blocking in the actual interaction sequence.
  • 3D printing

  • I have printed the base components of the first Earth Explorer prototype:It took 36h to manufacture the parts needed to get a rolling chassis. Things like a battery box, mounts for the driver boards, the Raspberry Pi or the camera are still missing,...
  • 3D Thrusters and mounts

  • Once you have a 3D printer, every problem looks like something you can fix with a 3D printer. After printing some new thrusters, I've also updated the tube mounts with some custom 3D printed pieces.In the photo you can see them in blue (some of the new...
  • 3D printer function development is over

  • After 2 years of perfecting the 3D printing function while working on the structure to withstand the CNC function we are finally finished.The next step in the roadmap is to develop the Universal Endless Paste Extruder. We hope to have news about it next...
  • CAD development and 3D printing

  • Once the final design was established I began to develop the 3D model using Solidworks.Isometric drawing:3D viewI also created/downloaded the circuit components and ensured that they fitted into the watch:Once everything looked good it was time to print!**Note:...