18 Results for "3D printing"

Linear Servo Actuators
Project by Ali
This is a general purpose 3D printed linear servo actuator (pusher style). Hope these save you some time on a future project!
- 17
- 17

OpenTorque Actuator
Project by Gabrael Levine
A powerful, compliant actuator for legged robotics
- 2k
- 451

3D Printed Robotic Actuator
Project by Aaed Musa
In this project I've engineered and designed several 3D printed Robotics Actuators in hopes of using one for a future quadruped Robot.
- 51
- 50

Low-Cost 3D Printed 6-DOF Manipulator
Project by Dongil Choi
Using 36:1 Planetary Gear Actuator Module (2ea), 27:1 Planetary Gear Actuator Module (1ea) and 40:1 Cycloid Gear Actuator Module (3ea)
- 29
- 28

3D-printable linear actuator
Project by Brian Brocken
This linear actuator is almost completely 3D printed and only has some very inexpensive materials
- 38
- 32

3D printable linear servo actuator
Project by semigg
100 kg / 215 lb pushing/pulling force, 7mm/s piston speed, 100mm stroke (adjustable limitswitch)
- 7
- 6

3D Printed Robot Actuator
Project by Paul Gould
A high speed and high torque robotic actuator using low-cost brushless motors, custom controller, 3D printed parts and bearings.
- 843
- 597

Quadruped w/3D Printed Recirculating Ball Screws
Project by Jeff
Quadruped robot to push 3D printed component limits. Minimizing cost by increasing development hours, made total sense when I started.
- 26
- 22

3D Printed Ballscrew Linear Actuator
Project by Anthrobotics
Developing a cheap DIY alternative to expensive machined ballscrew actuators (with a little less precision). For humanoid robots.
- 831
- 4

(8:1) 3D Printed Planetary Gear Actuator Module
Project by Dongil Choi
3d printed 8:1 planetary gear ratio actuator module with VESC firmware based circular motor driver
- 43
- 40

3d printed stepper actuator
Project by István Nótai
3d printed transmission for nema 17 stepper using 6mm GT2 belt+pulley and bowden cable
- 2
- 1

3D printed mini linear actuator
Project by Giovanni Leal
Need a mini linear actuator that is easy to print and implement in your robotics DIY projects? We got you
- 1.6k
- 87

3D-printable strain wave gearbox - harmonic drive
Project by Brian Brocken
3D-printed strain wave gearbox strong enough to pull a car forwards.
- 13
- 13

3D printed high torque servo/gearbox Version 2
Project by Brian Brocken
An almost completely 3D-printed servo which is able to pull a car forwards.
- 82
- 83

Braker One Robot
Project by rand3289
3D printed single motor robot
- 9
- 10

1
2
>
>|