2746 Results for "3D printing"

3d printing stuff
Log from electric hurdy gurdy synthy
currently printing all of this, I already forgot the tooth count and ratio of the gear box, but I think it's something like 1:5 or 1:6. Or maybe it was 1:10. Reminds me a bit of my #Locomatrix - 3D POV - a different approach

3D printing progress
Log from VT100 simulator and 3D printed replica
In parallel with working on the simulator, I'm printing the STL files provided by Michael Gardi: https://www.instructables.com/23-Scale-VT100-Terminal-Reproduction/Around this point, the VT100 body is almost done. Just the back third left. ...

3D Printing of the casing
Log from evive: a prototyping platform for makers
Lets show how we made the casing of evive. There are three parts of casing:Bottom CaseTop CaseLid (We call it magic lid)All the CAD files are available opensource at: https://grabcad.com/library/evive-case-1For prototyping of evive, we have used 3D printing...

3D Printing the Tray
Log from APC UPS NMC from a Pi
I've been tweaking the 3d printable design for the tray. Tabs and panel cutouts fit a Raspberry Pi 1, but can easily be adjusted for any model. I've also included a way to hold a piece of PCB in place, so it can slot directly into the card edge reciprocal...

First 3d print almost complete!
Log from Hackaday Superconference 2019 Badge Enclosure
Just need the cartridge door and actually transparent versions of all of the light pipes. Printing now...

More 3D-printing
Log from Ardumower Arctic Hare X2
Front nose 1/2 just finished! Right side is almost completed.Body assembly Body on chassischarging pin

3D Printing
Log from Tobi-P, the rabbit robot
All the 3D printing details can be found on the dedicated Thingiverse page. The slicer software is the latest PrusaSlicer (2.3 at the time of writing), combined with the latest firmware for the MK3 (3.9). And now that all the parts have been printed,...

3D Printing
Log from DSKY
3D Printing: Having never owned a 3D printer, I purchased a printer and started taking my modeling abilities to the next level. After learning a few important lessons in 3D printing (mistakes), I was up and running. It takes a day or more...

3D printing version 1 today
Log from Lily Power Pods, TEG + Concentrated Solar
in 7 hours I will have the main pieces printed. I will need to determine scale and go from there. If I like how it looks I will print at least two more sets of petals.

3D printing tests
Log from Custom Intellivision Controller
I printed out a version of design 1 and the hybrid one. I had the thought of making the side pieces removable, which would mean less 3d printing. I tried this with the design 1 print on the right. I'm instantly abandoning that idea. I have to deal with...

3D MultiTool
Log from We Should be Free to Tour the Solar System
When I envision an ultimately autonomous factory, its primary ingredients would be:1. 3D Multi tools (more on this below)2. Mobile robots facilitating the multi tool operations3. Metal casting equipment4. Specialized equipment for doing what the above cannot...

3D Printing
Log from Chronio
After designing the watch in Fusion360, I had to print the parts with a 3D printer, in my case the bq Prusa i3 Hephestos. As a material I am using PLA, mainly because it doesn't smell as bad as ABS. The main challenge was getting the case printed with...

3D Print Raaco Handybox Inserts (A9-1)
Log from Parts Boxes
At first, I bough extra compartment inserts. But realized shortly after getting my first 3D printer, that designing and printing my own was going to be cheaper and quicker. The dimensions of the smallest box are specified as 39mm wide x 55mm deep...

Rotating Base Designed, 3D Printing has begun!
Log from Ivan the Teambuilt Robot
It was davedarko in the comments who suggested that we build a robotic arm and that's what we are doing. I tried to develop a rotary arm segment that could be repeated but when I showed it to someone with pretty good robotics knowledge he shot it down...

Starting 3D Printing and Assembly
Log from NAVI - "Hey, listen!"
I've uploaded a Part 1 video on printing and assembly of NAVI. I've also decided to change my initial plan of using Black Widow 1200kv motors, instead opting for 920kv motors and external ESCs (they are however round, and the diameter of the motor, so...

1
2
3
4
5
>
>|