1350 Results for "3D printing"

8/12 - 3D Printing
Log from Modular USB Hotkey Controller
Today we finalized the magnetic connector design and started printing the module bases. We also started soldering the keypad module.

3D printing for PCB design
Log from SLoRa - Wireless weather station for agriculture
Designing the sensor board took me more time than expected which in combination with surprisingly fast delivery of temperature/humidity case with protective shell meant that the case arrived before I sent the boards to production.A rainy Saturday was...

volumetric 3D printing
Log from prism laser scanner
As described on Hackaday and Sci-hub, a new volumetric printing method has been described which uses two colors.A light sheet with a 375 nm laser diode and DLP projection between 450-700 nm. The prism scanner can also be used to accomplish this. Basically,...

3D Printing (04/12/18)
Log from Gesture Controlled Smartwatch
So I had the strap I CADed up 3D printed, its come out well. A little big , but i anticipated padding the strap out along with the platforms for the sensors, so its no deal breaker.

Starting 3D Printing and Assembly
Log from NAVI - "Hey, listen!"
I've uploaded a Part 1 video on printing and assembly of NAVI. I've also decided to change my initial plan of using Black Widow 1200kv motors, instead opting for 920kv motors and external ESCs (they are however round, and the diameter of the motor, so...

3D Printed Aquaponics Platform
Log from Smart Agriculture
July 25, 2017 | ProgressTH This is the latest indoor system we are working on. It is a small tabletop aquaponics system using a 350mm tall by 220mm diameter cylindrical glass container (14.5 liters/3.8 gallons), a modified 6 liter water bottle planter...

3D prints and assembly
Log from TimeArc
The 3D prints from Dirty 3D printing have arrived!Offcourse I have assembled it. First 3D print ever and it fits!First the front (clock face). It has a lot of leds and a big touch button in the middleNext the sides are capacitive sliders. They are on...

3D printing workflow
Log from Brightenmacher
First you start by drawing the design in a CAD program, i use Fusion360 for that, that looks like this: http://i.imgur.com/ge7VVix.png Then you save each individual component as a separate file and then combine them in a slicer software, this is pretty...

Rejuvenating my 12 year old 3D Printer
Log from RETRO 1 - Home Computer Console
I have an old 3D printer, an UP3D mini to be specific. It has a build volume of just 10cm x 10cm x 10cm. That's pretty small by modern standards.Additionally, the bed-heater is fixed at 60 degrees centigrade and in it's original factory state, it only...

3D printing on pedal power
Log from Practical Power Cycling
If you hang around in the 3D printing community, you have no doubt seen the question of electrical power come up, which I have always found to be kind of an odd thing to think about. We don't think about the power used by a hot glue gun or soldering...

New Bobble-Bot Chassis - A 3D Printing Story
Log from Bobble-Bot
We've spent the past month getting two new chassis built, color coordinated this time. Getting the first robot built, tested, and controllable took quite a while. The BB2 robot was designed, built, assembled, and disassembled more times than a sane...

More 3D Printer Problems
Log from ramanPi - Raman Spectrometer
Well, I set up the spectrometer for another trial print...this time with all of the mounting points, and mounts for the optics in place.. I've been using the glue sticks that come with the davinci printer..they work amazingly well.. This...

Making boards with 3D printers
Log from How lions etch PC boards
There are a few new methods of etching boards with resin printers. 1 method is to create a single protective layer of resin on top of bare copper. The mane challenges are evenly spacing the copper from the LCD, completely cleaning the uncured...

3D printing Sugar in more detail
Log from My machinery 2021: Direct Granules Extruder
My lazy Sunday afternoon project of 3D printing sugar is followed by a more in depth view on what can be done with that exotic material and what can't be done:Sugar isn't plasticsDue to a different chemical composition, the physical properties of sugar...

New 3D-models
Log from FATCAT: Altoids Tin Mod Tracker
As I discussed in the previous log I've decided to modify the build to fit the speaker below the PCB, instead of gluing it to the lid of the Altoids tin. The first thing to do was to determine how much vertical clearance inside the tin I had...

1
2
3
4
5
>
>|