print it, and once done remove all unneeded support materials., also please sand sharp corners down a bitnote: in this project Colorfabb NGEN was used for it's rigidness, but with only 10% infill note2: uploaded the models at 3Dhubs, since i don't have...
For the this i again used a voice coil but this time the motor is timed using a hall sensor and a arduino. This gave a consistent timing but I could not control the frequency as that was determined by the spring constant and the moment of inertia of...
This is a quick 3D printed housing for the transmitter. Can't be using a breadboard with wires hanging all over. This is not waterproof. Maybe in version 4.0... And, an enclosure for the receiver side. The servo mounted in the...
Laser cut faceplate, 3D printed case, two buttons and stereo 3.5mm plugs - for single and dual switching stuff :) this is definitely better than the cardboard box I had before! I'll add some demo functions and plugs to projects to show them off at the...
I didn't know it was actually a topic, so I decided to write it down: http://autotel.co/blog/an-essay-about-knob-design/ A 3d-print-able design will follow
Well, since I never got around to doing the 24V bed upgrade, and since I really wanted to get a bigger/better machine, I donated the Hictop to my local maker space, replacing an ancient wobbly reprap mendel. One of the members there, Forrest,...
The 3d print is getting there. One thing I forgot to play around with was removing the ground glass screen altogether. Then the design could work similar to the prism viewfinders.
07/21/2017 I am excited to start publishing the details of this open source hardware and software Robot Developing system. I plan to fully provide all source hardware schematics and PCB files, software, and 3D models for this project that I have...
Sadly, I have had to put the project on hold for a little while due to a car accident. Also my access to the 3d printer has timed out and I will need to buy one now, instead of borrowing one. I am currently trying to figure out the capacitors...
I took the time to make my recent changes a proper pull request against Machinekit so people can eliminate this bit from the task of getting this up and running. It fixes the problem of tripodkins not working properly at first if you are inverted...
My first idea was to build a cheap 3D printer by my myself. In 2014, there were some 3D printers on the market, but it was too expensive. So I've decided to design and make my own 3D printer as a personal project during my mechanical engineering studies....
The hardware it's the same as the Prusa 3d printer. Arduino Mega + Ramps 1.4 + Marlin firmware.Due to the size of the machine I had to use stepper motors larger than the Nema 17 for which the Ramps 1.4 plate (large format Nema 24) was designed. For this...
boards have been maded, and some of them will been sended out to users for free, if you interest it ,please contact me . testing with i3 pursa 3d printer