1495 Results for "3D printing"

3D Printing
Instructions from Reflow Oven
I printed 2 parts: A mount for the display to be glued (not optimised for the curvature of the oven) A mount for the rotary encoder

3D Printing
Instructions from Wombatics Otto
3D Printing SettingLayer Height : 0.2mmOutline Shells : 3Fill : 10%Supports: No STL Files2 x OttoDIY_foot_v08.stl2 x OttoDIY_Leg_v08.stl1 x Wombatics Otto Body.stl1 x Wombatics Otto Head.stl

3D printing parts
Instructions from 3D printed BLDC servo with 30Nm torque ($60)
For printing gears, I recommend using ABS or PC if it's possible. With 2mm skin and between 30 to 50 percent infill. For other parts, I personally used PLA with 25% infill and 2mm skin. PLA's elastic feature really helps the robustness of the structure....

3D Printing
Instructions from Modular Universal Jamming Gripper
3D print the required components. All files can be found at: https://github.com/Team-Automata/Modular-Universal-Jamming-Gripper/tree/master/3D%20Printer%20Files. Print all .stl files found in this folder.

3D printing
Instructions from Foldable solar panel
3D printable model was designed using OpenSCAD and is available on GitHub.

3D printing
Instructions from Making PCBs with 3D printed stencil and UV paint
Now the STL file should be sliced in favourite slicer (i used Cura) and 3D printed. The file can be mirrored before printing if necessary. I'm using some expansion options to make the holes and clereances a bit larger: Horizontal Expansion -0.04mmInitial...

3D Printing
Instructions from SpaceX Falcon 9R Lamp
It’s going to be near impossible to make this model without a 3D printer, while it could certainly be done, I wouldn’t recommend it. I have included the .stl files I used below, using only a fraction of the files in the original Thingiverse post. Print...

3D printing
Instructions from Minimalist Rover/ Satellite
When we had finished the satellite, we decided it would be nice to place it in its natural environment. That's why we decided to 3D print a model of the moon's surface.

3D print instructions
Instructions from PionEar: Making Roads Safer for Deaf Drivers
Few instructions for the 3D printing of the provided housing. Preferably use PETG material for printing the housing and car holder because of its higher temperature resistance, which is advantageous for use in the interior of the car. For reference I...

3D print
Instructions from Model railway FPV
Start by printing the body of the camera system. It is a single piece with the dimensions of 95x22x177mm, capable of holding all the components. I printed it in PLA, but considering the heat developed by both camera and VTX, ABS is strongly recommended....

3D Printing:
Instructions from RGB HexMatrix | IOT Clock
3D print all given 3D models.Print the screen layer in white PLA.

3D Printing:
Instructions from DIY Arduino Tic Toc Toe Game
3D print all the parts provided in the link below.3D Print 16 small button in white PLA and remaining parts can be 3D printed in any color you want.After printing all the parts install all the 16 white buttons in the array using some fast glue.

3D Printing
Instructions from 3D Printed Audio Exciter
3D Print each of the components in the .zip file. These include the coil bobbin (top and bottom), Speaker "cone", and speaker "back". Be particularly careful when you pull the speaker cone off the bed! I found that pulling the glass...

Laser Cut and 3D Printer Specified Components
Instructions from Automatic Infinite 3D Printer
Lasercut and 3D Print all specified components founds in the Mk. IV cad directory. While 3D printing, I recommend using print settings of: 0.2, 10%, and PLA.

3D Printing Your Case
Instructions from How to make your own 3D Printed Raspberry Pi cases
Once you have your design and material, it's time to start printing. You'll need to use a 3D printer, of course, and there are a few things you need to keep in mind. First, you'll need to make sure your printer is properly calibrated. Second, you'll...

|<
<
1
2
3
4
5
>
>|