267 Results for "G 골드피쉬카지노 cddc7닷컴 ♣보너스코드 b77♣정선파워볼༸바카라숫자흐름ɡ로하이픽🔟온카월드∮골드피쉬카지노이곳 siegfriedline/"

Goliath - A Gas Powered Quadcopter
Instructions from Goliath - A Gas Powered Quadcopter
Engine ServosA) Cut the sheet metal for the mounting bracketB) Scribe the linesC) Drill the holesD) Cut the sheet metalE) Bend the sheet metalF) Mount the servosG) Connect the throttle arms

SplineTravel
Instructions from SplineTravel
Run a dry run with your printer, to make sure the printer can cope with high density of G-commands generated by SplineTravel. If it doesn't move smoothly, adjust the settings in SplineTravel till the printer is able to move smoothly (disable Z-hopping,...

Bits of Time
Instructions from Bits of Time
The inclination switch is connected between GND (CON5, pin 1) and PA3 (CON5, pin 6). Attach it such that the switch is open when the hourglass is upright, and closed when the hourglass is upside down. To suppress vibrations it might be beneficial to...

CierzScience Tunnel
Instructions from CierzScience Tunnel
ASSEMBLY OF PRINTED PROFILE 3D PARTSAn alternative way of building the profile is a 3D printer. Previously has been designed with the software Catia. The following video explains the Assembly of these parts.

ESP8266 Mobile Rick Roll Captive Portal
Instructions from ESP8266 Mobile Rick Roll Captive Portal
Wiring Connect the '+' lead of the piezo to GPIO 4 (D2 on WeMos D1 Mini) and '-' lead to Ground. I chose GPIO 4 because I installed the long leads with the headers on the WeMos D1 Mini. The spacing from ground was perfect to just plug the buzzer in direct...

iot-433mhz
Instructions from iot-433mhz
Use NPM to install the platform on a RPi: npm install iot-433mhz -g --unsafe-perm

Connect Stack Light to PCB
Instructions from Stack Light Monitor
Connect the common wire to the "+" screw terminal, the green light wire to the "G" screw terminal, the yellow light wire to the "Y" screw terminal, and the red light wire to the "R" screw terminal.

Assemble Components on Prototyping Board
Instructions from Great-Grandparents' Digital Dream Alarm Clock
Prototyping BoardArduino Mega 2560

Clone and install the RUNBOX repo to your Raspberry Pi
Instructions from RUNBOX
1. Clone the repo git clone git@github.com:Dude-its-Matt-G/RUNBOX.git 2. Install NPM packages npm install 3. Rebuild modules ./node_modules/.bin/electron-rebuild 4. Run the application npm run start

Software
Instructions from Mike's Robot Dog
Making the dog walk is quite the challenge, so here's my approach. I created a drawing showing "standing" leg positions in black and progressive changes in red. The approach is to: 1) lift the left front and right rear legs 2) move the left front and...

Serial / Wireless Brainwave Biofeedback
Instructions from Serial / Wireless Brainwave Biofeedback
To see the visualizations:Go to https://github.com/kgerst/hack-the-gap-2015Install node.js (https://nodejs.org/)Open terminalType:git clone https://github.com/kgerst/hack-the-gap-2015.git[If error, make sure developer tools are installed]cd hack-the-gap-2015sudo...

Raspberry Pi Driven Telescope Mount
Instructions from Raspberry Pi Driven Telescope Mount
Install the indi server web manager (you may need to do this as root):apt-get install python-requests python-psutil python-bottle apt-get install git git clone http://github.com/knro/indiwebmanager /opt/indiwebmanager cp /opt/indiwebmanager/indiwebmanager.service...

Yet another laser engraver / cutter
Instructions from Yet another laser engraver / cutter
Drawing Software and g-code generationFor drawing and editing SVG vector graphics I use Inkscape and the 'laserengraver' plug-in. I will not go into much detail here since there are a lot very good tutorials out there for this.Just one additional remark:Since...

SplineTravel
Instructions from SplineTravel
Slice your model, write the resulting g-code to a file. When slicing: Use relative E values (using absolute E values may work, but it is untested so far). In Slic3r, make sure "Wipe while retracting" is off (in printer settings tab).Note: Retraction...

SplineTravel
Instructions from SplineTravel
In SplineTravel, specify the filename of the g-code program file as an input, and another file as the output. Note that the output file is going to be overwritten if it exists, without any questions.Adjust the settings of SplineTravel (manual is to be...

|<
<
1
2
3
4
5
>
>|