2444 Results for "N 온라인손오공게임 CDDC7닷컴 ◆프로모션번호 b77◆용산카지노㈣월드컵예선경기생중계ᇭ하노버ᇡ토토신🍋온라인손오공게임강추 luniform/"

New Cool Junk n Stuff
Log from Stylin' safety jacket.
I have won a Bus Pirate in the random drawing contest! This is awesome because I have always considered buying one and coincidentally purchased one yesterday so I could try to interface with this neat thing I was given at work: Its a sweet Vizio Bluetooth...

More ADF-7021-N Driver work.
Log from SBHT - VHF DIGITAL RADIO
A bit more work adding cal to driver.

Monadic Gates N-Z, Completed Schematic
Log from Tern - Ternary Logic Circuits
Monadic gates N-Z are now re-tested, verified, and the schematic is done up neatly in it's final form. The link is here.

Design challenge n.11: Watchdog
Log from Green BMS
Microcontrollers can crash. This can happen for sketch mistakes, but also for failures in the microcontroller itself... so it can happen. When this happens, the outputs remain frozen at the last value and this led me to an important question: What would...

Testing, testing, 1, 2...n
Log from Arcus-3D-M1 - Full Color Filament Printer
Print head is back together after the self induced meltdown. I added the two changes I mentioned (better seal fit, and a backup seal with a path for leaked filament) to the existing print head. Welcome to version 9.1. I immediately used the leak port...

Crack It Open (1 / n)
Log from Mark 21 CDU Keyboard for PC Flight Simulation
So I got these buggers in today. They are pretty beautiful! The buttons are _very_ clicky. There are 22 small screws in the back plate. Each are mercifully the same size. Here is a picture of the back of the back plate. It's REPAIRABLE! ...

Aud/*u*/i/*n*/o
Log from Sonassist
No, it's not a typo...I was just trying to make a pun. And I'm sure someone has smashed audio and Arduino together in a clone-style board before. This log is about the requirements, challenges and solutions I found in generating stereo audio, using Arduino,...

We got good n bad news
Log from Fl3xWatchOLED
I've tested the circuit. Good news is the 10 volt boost circuit work pretty well, all electrical characters met what I wanted. Sadly the bad news is the connector seems to be happy with faced down FPC. which it's means that I need to use the connector...

Operations: Z, S, U, R, N,
Log from Bit-serial CPU based on crossbar switch
Following stack operations have much in common: Turn all switches off (remember, MT8816 has a RESET signal so this can be done for all 256 at once, in one microcycle)Set up the 16*16 matrix according to the operation belowDrive all registers around for...

Design Challenge n.6: balance circuit mosfet N short circuit failure
Log from Green BMS
This was the first version of the balancing circuit diagram of cell module: The balancing command digital output (from Attiny microcontroller) drives a N-channel Logic Mosfet which closes the circuit on the balancing resistor. I did not like this version...

VoCore + WeMo ebb N flow hack
Log from Aquaponics HG
WeMo Insight SwitchCost: $49.99 (Amazon.com)VoCore: $39.99Control: WeMo AppMy goal turn the WeMo on for 10minsto drains the tables into the pond.Then turn it off for 20mins to ebb the deep water beds.Repeat 24hrs per day.WeMo required start on the hr...

Design challenge n.10: Project development
Log from Green BMS
With my experience I have learned that, before starting with the development of a project, it is advisable to dedicate some time to create a simulation platform, in order to have the whole system at hand, with the various interconnected components. It...

Design challenge n.12: Control Unit Interfaces
Log from Green BMS
The main function of a BMS is to give consent to charge or discharge the battery. To make green BMS as versatile as possible, in order to cover many types of applications with different powers, I made this choice: I decided to use relays. With the free...

Design challenge n.14: data exchange management
Log from Green BMS
A complicated challenge of this project was the management of data exchange in the installed networks. The I2c communication with the cells is the main network (always alive), the Bluetooth communication with Android app is the secondary network, that...

Design challenge n.8: temperature sensors
Log from Green BMS
One of my goals in this project was to do a temperature control on each single cell module, in order to remove the enabling for charging and discharging in case of high temperature. First I had to choose the type of sensor. Due to the supply voltage...

|<
<
1
2
3
4
5
>
>|