Close

99 Results for "bldc"

  • Using BLDC motor in low speed
  • Details     from Using BLDC motor in low speed
  • In this project, we are trying to drive a BLDC motor in very low speed. This means we need to have a very low PWM values update rate. However, the PWM values update rate is constant, the rotating speed of motor's rotor may not being what you expected....

  • Cardboard Hovercraft Robot
  • Details     from Cardboard Hovercraft Robot
  • Hardware:* Cardboard (Office Max)* Spray Glue (Hobby Lobby)* Ripstop Fabric (Ebay)* Nylon Thread (Hobby Lobby)* Large Paper Clips* 3M Foam Tape* Hot GlueElectronics:* 3x HL4008 EDF (Ebay)* 3x 30A BLDC Controller (Hobbyking)* Servo* 2250mAh Lipo Battery*...

  • Electric Longboard MarkII
  • Details     from Electric Longboard MarkII
  • What we are looking at here is; 12 Hp 4 Wheel Drive - 4 x 6374 2250W BLDC motors .5kWh battery pack - 64 x ANR26650M1-B LiFeP04 2.4Ah 10C - 12min charge time batteries  48in x 13 in deck 60 volt system 60mph+ Top speed 40mile+ range 1.5kW charger...

  • RC Swampboat Repair
  • Details     from RC Swampboat Repair
  • Printed in PLA from Filaments.ca, the brace from the tower to the vanes was easy enough to fix... but why just repair? I made it betterer. I also upgraded the stock BLDC to one about 20% more powerfuller (2212 2200kv) and put a triple blade (5x4) prop...

  • High performance dorm room CNC
  • Details     from High performance dorm room CNC
  • The main goals of this design are:Design has to be cheap(ish); parts i can get for free through contacts won't be seen as costs, as is stuff like the water-jet cutter i can use for free at my university. Can fit under my bed for storage when not...

  • PoneBot
  • Details     from PoneBot
  • - The motion systemCreate a BLDC actuator with or without gears driven by moteus controllers (mjbots is not affiliated with this project) Adapt the moteus quadruped control system to more than two joints per legCreate a frame made from Aluminum...

  • OpenLiDAR
  • Details     from OpenLiDAR
  • So the first prototype is coming together. Changed the Brushless motor from a DJI 3510 to an PM2805 with encoder feedback on the Vertical axis. The first version will use a LidarLite V3, here we need a really slow vertical movement @ 0.01 hz and 3.0...

  • BoostWheel
  • Details     from BoostWheel
  • I am currently in the forumlating stages. The current build plan is as follows:1) Find a suitable motor for prototyping: currently considering the MBG36F 36V motor: http://www.goldenmotor.com/2) Find a suitable open source motor driver with...

  • Multi-Axis "Modular" BLDC Driver
  • Details     from Multi-Axis "Modular" BLDC Driver
  • This board is meant to drive several (the goal is to make the board extendable from 1 to 6+ ESCs) BLDC motors for general use (originally a multi-axis motion simulator).  Currently, the board is being designed with the following motors in mind: ...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday