Obviously for good visibility and low power requirements, the 3.2" Inch ILI9341 display is a bad choice. I ordered a few e-ink displays to conduct a few experiments here. However, this will be difficult since the days are becoming shorter here and...
I'm currently working on different improvements to the sensor: I added LoRaWan to the sensor already (using the SPI bus) and I'll add a bigger update on this in the next weeks. Now that the days are becoming shorter in Germany, the visibility of the...
Your kit will likely have air bubbles in the ink supply lines, use whatever method you can find to move the ink. Also your printer will have residual ink inside the head in most cases, so you will want to purge as much of it as you can through the printer...
After you have done all these steps the machine should be ready to use. Fill ink (I used water mixed with cheap ink) into the ink containers and flush the tubes by using a syringe and drawing the ink to the printhead. Make sure everything is seal, because...
How to have a local EPUB file full of messages and images on a Barns and Nobel NOOK Touch Simple with E-Ink. E-ink allows you to put up a real window display that will work in direct sunlight and with high-beam headlights on it. It can't animate or refresh...
To draw your own Fritzing parts that could be used in your Arduino projects, you need to download Ink Scape and Fritzing. Ink Scape can be used to draw the board layout, schematic, and PCB in .svg format. Later these separated .svg files will be...
Your CISS supplier will likely use the path of least resistance in their kit, but this can also have the negative impact of making certain parts of your printer or all-in-one unusable or clunky to use. In my case I was worried about the scanner being...
M2.6 self-tapping B-type screw2:1 Heatshrink tube multiple colors115x90x55 mm enclosure boxRaspberry Pi PicoUSB Type B IP68 panel connector4 pin aviation connectorMetal electric foot switchUSB printer cable A typeMicro USB cable