5666 Results for "fix"

burn firmware CY7C68013A on a Mac [nightly brain dump]
Hacker page by davedarko
Warning: Only read if you want to flash and use the CY7C68013A module with sigrok on a mac! It all started six years ago with this article, written by @Mike Szczys: http://hackaday.com/2011/12/15/saleae-logic-analyzer-knockoff-hacking/ Once upon a time...

2015 Hackaday Prize: Build Something That Matters
Log from Hackaday.io Project
Last year we challenged you to build the next generation of connected devices. Six months later, the best teams and projects from around the world battled for the greatest prize of all: the respect of their peers and a trip to space. This year, we're...

HydraFW v0.6 is coming with lot of new features …
Log from HydraBus v1 Rev1.5
After a long time without any news lot of things was done in background and mainly by Balda & Nico which are amazing contributors to HydraFW !New features planned for HydraFW v0.6 release:HydraBus specific: JTAG protocol mode (thanks to Baldanos) Classic...

Power Supply has Arrived
Log from Vacuum System for Deposition
The power supply showed up today. Barely made it here on it's pallet and just a bit of minor damage.It was not banded very well and the fan box on top was ripped off. No big deal, took like 10 minutes to fix the box.Popped it open to find mice had made...

Open Source 6309 Monitor?
Log from HD6309 Singleboard Computer
I've been slowly chipping away at the edges of a dilemma. I've been very comfortable using Dave Dunfield's MON09 monitor program for this project. It's a really nice full-featured monitor that works great, and took almost no effort to port to my hardware...

Speech Adaptation
Log from Demolition Man Verbal Morality Statute Monitor
In this update I've worked on improving the speech recognition by adapting PocketSphinx's acoustic model to my microphone and voice. I've also added a switch to put the device into a quiet mode where it doesn't sound an alarm or print a ticket...

Firmware Ahoy!
Log from Marauder's Map
We now have a first draft for firmware for all three devices!After spending about a week playing around with the EZ430-RF2500, we finally have something to show for it! We have three build configurations in Code Composer Studio each with a first draft...

The Beginning of the Implementation
Log from GloveCopter
11/10/12Today, I began the actual implementation of the IR protocol. Using the links here and here as references, I wrote up an Arduino sketch that should have caused the helicopter to turn its throttle up to 50%. I scavenged an IR LED from an old A/C...

Updates! Circuit boards! Mistakes! Upcoming Plans!
Log from Coil Gun/Gaus Cannon
I ended up using 2 boards, because I ended up making changes to the optical gate circuits after I had sent off for the main board. Good news is that it was easy to just make a slave board for that portion of the circuit.I made a few mistakes when...

1.0: Proof of Concept
Log from XY LED Light Painter
So far I'm using the Arduino Uno, two EasyDriver boards, and two of the cheap rails with an LED on top to test the concept.So far has been good. Getting the two motors to spin simultaneously was very easy using the AccelStepper library and following...

Working on Vsphere 6.0 beta
Log from The HYDRA multiheaded virtual computer
First of all, before the Hydra was eliminated from the space trip contest, my attention was unfortunately entirely focused on income. This has been back-burnered since late July, with not much forward motion since. I didn't really expect to place or...

Distractions, Setbacks and a little progress
Log from Iota: Internet of things for all
So I have been quiet of late, and I thought it was about time I explain myself.DistractionsTo start with, I have this little cheeky girl growing her first few teeth:Which has been a bit more stressful than normal, with less sleep and less time to work...

Broken Rotor Axle
Log from Goliath - A Gas Powered Quadcopter
Test 41 was to determine if the starboard engine was working correctly again. After idling the engine for a while, the rear starboard rotor axle broke.Looking at the slow motion video, it's clear that the axle breaks, and then the belt tension pulls...

PyPPM 2.2 is born
Log from PyPPM: A Proton Precession Magnetometer for all!
There's a crick in my neck from staring at these monitors too long yesterday, but it's the necessary pain from re-working the entire PyPPM 2.1 design into a new set of schematics and board files: PyPPM 2.2!There are a few big changes and a smattering...

It's time to get started
Log from 3-In-1 Desktop, CNC and Laser Engraver
I've seen a lot of traffic here lately and for all those following, thank you! I have been researching how to proceed next and have actually realized the answer was staring me in the face all this time. I have already built a viable machine, albeit out...

|<
<
201
202
203
204
205
>
>|