1259 Results for "phone"

USB Type-C breakouts
Details from USB Type-C breakouts
I wanted to understand how the new USB spec works after I got a new phone with it on. I have designed a couple of breakouts for experimentation so I can start using it in some of my other projects. I have also put a guide up here to show how the type...

Dual Screen Mirrored In-Car Media Center
Details from Dual Screen Mirrored In-Car Media Center
Pi runs OpenElec and connects to an AT&T Wifi Hotspot. Video can be controlled via the controller or via a phone connected to the same hotspot. I use the Kore Android app, as well as the Raspberry Pi SSH app to run simple commands (uptime, get temperature,...

WiFi Kettle/CoffeeMaker
Details from WiFi Kettle/CoffeeMaker
The GUI/Device is ONLY alive when the Kettle is ON THE BASE STATION POWER IN :: Kettle 230V > 5V Phone Charger > 5V NodeMCU :: WIRELESS SOLUTION :: Portable 4G Broadband with SDCard with the web files + FTP Server

WiFi Analyse and Terminator
Details from WiFi Analyse and Terminator
Attention: ①Only Android phone is supported. ②OTG interface is a requirement. ③Attach WiFi Termination hardware. ④Only 2.4G WiFi signal is supported. Paralyze all connections under a specific WiFi Hotspot It will kill all mobile connections under the...

A voice over ip phone with a microcontroller
Details from A voice over ip phone with a microcontroller
in this project processing java ide is used to receive audio data from com1 encode into strings and packet with my defined headers then sends the packet to an ip adress on a LAN. bellow is the screen shoot of the APP. it sends SMS , voice mails and make...

Smart motorcycle
Details from Smart motorcycle
Display incoming call, time, weather and direction from my phone.

Qwiic NFCPROM
Details from Qwiic NFCPROM
This is a dual port EEPROM that can be interfaced through an NFC antenna or Qwiic connector. The board is 15mm X 15mmIt allows you to create an NFC tag that can be updated over I2C.WIth standard NFC data formats you could share wireless connection details,...

App Control Bluetooth (BLE) R/C Car with LEDs
Details from App Control Bluetooth (BLE) R/C Car with LEDs
The are many lot cost RC cars with lots of features like the LED headlights and underglow lights. However, the remote controller came with the car cannot control lights and motors individually. With mobile App and Arduino board, we can convert...

Physical Keyboard for any Android phone
Details from Physical Keyboard for any Android phone
After failing to map the pinouts to the Priv's combined keyboard/trackpad, I decided to use a keyboard off a Q10, due to the decent amount of information available. Using a Hirose BM14B connector soldered onto a PCB (and this, ladies and gentlemen, turned...

The Telephone XLR8OR
Details from The Telephone XLR8OR
The Telephone XLR8OR is a simple circuit that allows you to connect an old analogue telephone to any mixer or microphone preamp that can supply 48V phantom power and use it as a microphone. It works by taking the 48V phantom power present on the two...

dummy project
Details from dummy project
I've logged in from my phone and I can't upload files from there either. The uploading interface uses Angular Javascript, which started phasing out in January 2018 and is no longer supported by Google as of January 2022. Doesn't work using Chrome...

The Mailblocks: Physical Inbox for Virtual Alerts
Details from The Mailblocks: Physical Inbox for Virtual Alerts
At a high level, here's what's happening: A Raspberry Pi acts as a wireless router, with custom DHCP, DNS, and HTTP servers running on board.The DNS server redirects lookups seeking any of Google's listed domains for their push service to... nowhere!In...

Phone intercom system
Details from Phone intercom system
* inside a phone wire there are typically 4 colored wires red, green, black, and yellow. for this project there are three circuits, a red/green circuit, a red/black circuit, and a red/yellow circuit.* the red/green combination is the intercom itself....

Build an Android-controlled robotic arm
Details from Build an Android-controlled robotic arm
This robotic arm was built using laser cut acrylic sheets. It is moved using 3 standard servo motors and a small one for the gripper. Unlike most robotic arms all heavy servo motors are in the base. This makes the upper part of the robotic arm lighter...

nRF24L01+ network to control lights
Details from nRF24L01+ network to control lights
I have been doing this project for quite a long time and this is the third and final major revision of the project.ServerThe server or the data transmitter consists of a RPi 3 with bluetooth and an nRF24L01+ radio module. (433MHz radio module coming...

|<
<
3
4
5
6
7
>
>|