Close

3408 Results for "soil+sensor"

  • Soil Moisture Sensor

  • Working of Soil Moisture Sensor The soil moisture sensor consists of two probes that measures the volume of water in the soil. The two probes allow the electric current to pass through the soil and, according to its resistance, measures the moisture...
  • Capacitive Soil Moisture Sensor

  • In order to reduce agricultural water cost, soil moisture should be measured by affordable low-cost sensors. As well as gypsum soil moisture sensors in Vinduino project, this project tries to build soil moisture sensors. There is research demonstrates...
  • The Personal Garden Project

  • This project uses rapidtest soil testers to change the color of the soil and an RGB color sensor to detect concentrations. Vials are centrifuged by a DC Motor controlled by an arduino. The only manual component is inserting the vials into the holder....
  • Microbit Greenhouse Monitor

  • This project is intended as a useful educational tool, allowing schools to utilise the BBC Micro:bit to collect data from a greenhouse, and display it on a webpage. In order to facilitate network connection, data is sent from the Micro:bit to an ESP32...
  • Eduponics Mini

  • The Eduponics Mini ESP32 board consist of the following onboard sensors and modules: ESP32-WROVER MicrocontrollerWater quantity, soil moisture and pump XH2.54 interfacesTiny relay that is used for controlling the pumpON/OFF Switch12 V DC Power interfaceUSB...
  • Iguana

  • About Iguana is a LoRa sensor for smartCitys. It is an instrument designed to monitor soil temperature and humidity in real time. It is a low-cost device designed to address a wide range of scenarios. It has connectivity to different types of wireless...
  • Lora Soil Moisture Sensor

  • This Soil moisture sensor intends to be a lora node as in the greenhourse lora networks.  It detect/report the soil status, and the temperature, to the lora gateway, which is accessable with WIFI, so the remote monitor can get all the points moisture...
  • The "Leaf it Alone"

  • Design Considerations If I could redo the project over again with the same constraints, one thing I would focus more on would be the mechanical structure of my device. For example, my cardboard housing makes it difficult to remove any of my electrical...