4000 Results for "solder fume extractor"

Solder mask laser etching?
Log from Laser4DIY
When you are done with laser structuring the copper your PCB still is not finished. A proper solder mask is one of the thinks you'd want. Wouldn't it be nice if it could be done with a laser as well?We did a quick test with a solder mask film (Bungard...

Day of solder
Log from Microwave Transmitter
Friday evening is fun evening for some, but soldering evening for me. In the coworking space with my beer and curious passerby I patiently sat and manually placed every single component, ruining my eyes and hurting my back. This is how the process went:Placing...

Tiny LED Solder Pads
Log from Mixed Reality Room Scale Shooting Gallery
Almost finished printing the target hinges, and started soldering the sections of LED strip.The 144 LED strip has very small solder pads, but the wiring is holding and I've added hot glue to reduce any stress from the connection.Once both the wire and...

Solder Progress 9
Log from Music Spectrum and dB Visualizer
Soldered R55, R54, R52 and R49, lost R59 when I opened the packageSoldered R40, R42, R43, R44, R45, R46, R47Soldered R32, R33, R37, R38Soldered R20, R23, R24, R25, R26, R27, R28, R21 got attached to the solder tip and ended up getting destroyed**R40...

Machine Learning Solder
Log from The Disassembler by team Table Flip
A machine learning component is needed so that the modified 3D printer will know where to apply the soldering iron on the board. The modified printer will take in a video stream of the board.The machine learning algorithm will identify solder blobs.The...

Ready to solder
Log from ledkt_v1
I got the last of the parts I still needed in the mail today! Going to start soldering later tonight, and I'll post another update once I'm done.

Components and Solder
Log from The DUO
Fresh out of the oven, bridges and all! Didn't get a stencil for this one.Who loves cherry MX keys? We have the first assembled one!

Solder Progress 1
Log from Music Spectrum and dB Visualizer
Soldered all of the LM324 quad amp IC'sSide that is more beveled is where pin 1 isIncorrectly oriented the first one, bought a heat gun to de-solder and re-orient itBought isopropyl alcohol pcb cleaner to clean flux and solder residueOrganized bags containing...

Solder Progress 11
Log from Music Spectrum and dB Visualizer
Attempted to solder capacitor onto area with broken pad by soldering to the trace after scrapping the protection offWas able to scrape protection off, but was not able to get solder to stick to the exposed copperEnded up making the situation worseThe...

Solder Progress 10
Log from Music Spectrum and dB Visualizer
Soldered all SMT components that weren't lost/destroyed/had a pad that rippedOrdered replacements for:C1 C19 C21,C22,C37,C39,C40,C41,C42 C47,C48,C49,C52,C53,C57,C58 C60,C61 R21 R56 R58 R59 R60 R66,R67,R70...

Solder Progress 2
Log from Music Spectrum and dB Visualizer
Des-soldered the first LM324 IC and re-soldered it in the correct orientationCleaned excess flux on the boardSoldered U17, U18 and Q1***Going to wait until I've soldered every component and tested the board before I buy replacement for C60 &C61 in case...

Solder once, Beepout Twice
Log from PIMP (Personal Information Manager & Pager)
Thought Experiment: You solder a very tiny connector to an breakoutboard to try beep out the thing you connected to that connector. You find a few connections but for Farad sake you can not find others. You totally must have broken some connections on...

Solder, glue and paint
Log from Classroom music teaching aid
SolderI know you'd rather hear about the solder, so I'll start there. The central part of the electronics is the Teensy3.2, Audio adapter, and LED driver(ATMega328) which all stack together in a small package. First take a look at the picture. The perfboard...

Hard to solder
Log from Global radiation monitoring network
It's been another day, full of...soldering. To cover the high demand, I've been hard at work producing more units for those interested in helping the network expand. Here's more than 20 PCBs. Tubes will be added later, also the software, and the calibration...

|<
<
2
3
4
5
6
>
>|