Marble Run Building Bricks

Back to overview

We are working on LEGO®-compatible Marble Run building blocks / bricks for up to 12 mm balls.

jtronics

Back to overview
Files 0
Components 0
logs 0
Instructions 1
Discussion0

1

3D Print Settings

The INITIAL LAYER HEIGHT is very important! Check your printer nozzle calibration!

Slicer: Cura Material: PLA, Nozzle: 0.4mm, Layer: 0.15mm, Initial Layer: 0.175mm, Infill: 15% WallThickness: 0.8mm, TopThickness: 0.6mm --> 4 layers, BottomThickness: 0.6mm --> 4 layers Fill Gaps Between Walls: Nowhere, Filter Out Tiny Gaps: Yes, Optimize Wall Print Order: Yes

Some Bricks, like looping need: use adaptive Layer: Yes, layer variation: 0.5 --> layer 0.05 to 0.15mm

Discussions