Close
0%
0%

ZemiCharmed Life

Mashup of a Zemismart KS811 and a Nextion

Similar projects worth following
66 views
0 followers

Experiments with  KS811 2-gang + Nextion NX3224K024

  • Phase 2

    flynnwt09/19/2019 at 23:48 0 comments

    Semicopacetic 3D printing mockups progress.

  • Phase 1

    flynnwt09/15/2019 at 18:46 0 comments

    Works fine on AC.  

  • ​Phase 0

    flynnwt09/15/2019 at 02:13 0 comments

    GPIO 4/14 easily accessible with through-holes and they work as UART1 to Nextion.

    Sucking about 180ma from external 5V.

    [20:39:16][D][nextion:208]: Got touch page=0 component=2 type=RELEASE
    
    [20:39:16][D][binary_sensor:033]: 'Nextion Touch 1': Sending state OFF
    [20:39:17][D][nextion:208]: Got touch page=0 component=3 type=PRESS
    [20:39:17][D][binary_sensor:033]: 'Nextion Touch 2': Sending state ON
    [20:39:17][D][nextion:208]: Got touch page=0 component=3 type=RELEASE
    [20:39:17][D][binary_sensor:033]: 'Nextion Touch 2': Sending state OFF
    [20:39:18][D][nextion:208]: Got touch page=0 component=4 type=PRESS
    [20:39:18][D][binary_sensor:033]: 'Nextion Touch 3': Sending state ON
    [20:39:18][D][nextion:208]: Got touch page=0 component=4 type=RELEASE
    [20:39:18][D][binary_sensor:033]: 'Nextion Touch 3': Sending state OFF
    [20:39:19][D][nextion:208]: Got touch page=0 component=2 type=PRESS
    [20:39:19][D][binary_sensor:033]: 'Nextion Touch 1': Sending state ON
    [20:39:19][D][nextion:208]: Got touch page=0 component=2 type=RELEASE
    [20:39:19][D][binary_sensor:033]: 'Nextion Touch 1': Sending state OFF
    [20:39:20][D][sensor:092]: 'uptime': Sending state 38.56200 s with 0 decimals of accuracy
    [20:39:27][D][sensor:092]: 'wifi signal': Sending state -46.00000 dB with 0 decimals of accuracy
    [20:39:48][D][switch:029]: 'Relay 1' Toggling ON.
    [20:39:48][D][switch:045]: 'Relay 1': Sending state ON
    [20:39:50][D][switch:029]: 'Relay 1' Toggling OFF.
    [20:39:50][D][switch:045]: 'Relay 1': Sending state OFF
    [20:39:57][D][light:261]: 'LED 1' Setting:
    [20:39:57][D][light:270]:   State: OFF
    [20:40:20][D][sensor:092]: 'uptime': Sending state 98.55900 s with 0 decimals of accuracy
    [20:40:27][D][sensor:092]: 'wifi signal': Sending state -43.00000 dB with 0 decimals of accuracy
    [20:40:47][I][ota:046]: Boot seems successful, resetting boot loop counter.
    [20:41:20][D][sensor:092]: 'uptime': Sending state 158.56000 s with 0 decimals of accuracy

View all 3 project logs

Enjoy this project?

Share

Discussions

Similar Projects

Does this project spark your interest?

Become a member to follow this project and never miss any updates