Following the normal papercraft workflow, but with PCBs instead
Already have an account? Log In.
To make the experience fit your profile, pick a username and tell us what interests you.
This project is licensed under the Creative Commons CC BY-NC-SA 4.0 License
https://creativecommons.org/licenses/by-nc-sa/4.0/
Low Poly Mask by kongorilla: https://www.thingiverse.com/thing:32189
Original work licensed CC BY-NC-SA 4.0 - https://creativecommons.org/licenses/by-nc-sa/4.0/
Original work has been modified.
pcbPapercraft.movShort video showing the build process!quicktime - 16.01 MB - 10/05/2020 at 15:23 |
|
|
kicad-project.zipKicad project for adding the traces and footprints.Zip Archive - 90.25 kB - 09/19/2020 at 15:58 |
|
|
mesh.stlActual STL that was unwrappedStandard Tesselated Geometry - 32.44 kB - 09/19/2020 at 15:58 |
|
|
mesh.mixMeshmixer file used to clean up the original STLmix - 9.63 kB - 09/19/2020 at 15:58 |
|
|
dxf-and-svg.zipDXF and SVG files of the individual panels to be milled.Zip Archive - 546.08 kB - 09/19/2020 at 15:58 |
|
Sure! The full youtube video about the build is liked in the project, but I'll upload a short video showing the build process!
Oh I just saw it, if you move it out of the description and into the details section it will show up with a video frame. For everyone else reading this comment, here it is: https://www.youtube.com/watch?v=uk_gvd5PMLI&feature=youtu.be
PLEASE NOTE: The mask is a design under a CC-BY-NC-SA license. I created it and released the original source and license info here: https://www.thingiverse.com/thing:32189
Since the license is "Share-Alike," the files shared here by [Stephen] are released under the same terms.
Stephen
SelfCAD
XXX
Ali
Carl Bugeja
Great project! 2 questions. How did you know the angle to which you had sand the pieces. And is the while mask made out of copper?
Thankss