Quantity   Component name
1 × Raspberry Pi Zero W
1 × Adafruit Mini LiPoly/LiIon USB Charger https://www.adafruit.com/product/1905
1 × Adafruit PowerBoost 1000 Basic (5V Boost module) https://www.adafruit.com/product/2030
1 × 1000mah rechargable li-ion battery, 3.7V
1 × 10x2mm Vibration Motor Disc For haptic feedback. I used: https://www.amazon.com/gp/product/B073YFR5WR/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
1 × Apple iPod - 4th-gen, model A1059 Officially referred to as the "Click Wheel" iPod
1 × Adafruit 2" NTSC/PAL TFT Display https://www.adafruit.com/product/911
1 × 2N3904 NPN Transistor To drive the haptic motor from the Pi's GPIO
1 × 0.5mm, 8 Pin FPC cable breakout board anything greater than 8 pins will work. I didn't really "need" this, but I didn't feel brave enough to solder directly to the click wheel's ribbon cable. I used: https://www.amazon.com/Pins-Breakout-Board-0-5mm-Pitch/dp/B07H5GCZFW/ref=mp_s_a_1_13?dchild=1&keywords=fpc+breakout&qid=1612011649&sr=8-13
1 × 32+ GB SD card For the pi.