Quantity   Component name
2 × 1uF 0603 16v
2 × 2.2uF 0603 16v
2 × 10uF 0805 16v
1 × FH35C-11S-0.3SHW This is Hirose 0.3mm pitch FPC connector, 11 pins.
1 × 33uH 1210 Inductor for out 10v OLED bias boost IC.
1 × LTC3459EDCB (rev2 board) or FAN5331SX (rev3 board). depend on which rev, rev2 uses the LTC chip, rev3 uses FAN5331
1 × 1K 0603 (optional pull up for STM8L). Reset Pullup (optional, since there's internal pull up already. just replace with some cap would be fine.
2 × 4.7k 0603 This is for I2C pullup
2 × 470k 0805 voltage divider for LTC3459
2 × 2M 0603 One is for pull down of LTC3459, another is for voltage divider.
1 × 5 way smd joystick switch https://www.sparkfun.com/products/10063
1 × STM8L151F3U6 microcontroller our brain of this project
1 × LIR2032 battery or can be other 3v rechargeable battery
1 × EPW1404AA1 This is our star, Futaba Flexible OLED display.
1 × BAT-43 SOT-323 (rev3 board). Schottky diode for rev3 board.