Quantity   Component name
1 × Arduino Pro Mini 5V/16MHz I used a clone
1 × ENC28J60 Ethernet LAN Module Any board using this chip should work
1 × Mokungit 93 Leds WS2812B WS2812 5050 RGB LED Ring Lamp Light Set of 6 NeoPixel rings
1 × Push Button Switch For reset button
1 × LD117V33 Linear Voltage Regulator
1 × 5V 2A DC Power Supply with 2.1mm Barrel Connector
1 × 2.1mm Female Power Jack Adapter
1 × 22AWG Solid Core Wire For structure and data/power connections
1 × Heat Shrink I used both red and black so it's not as noticeable
1 × 2x6 Pine Board I used a scrap piece for the base
1 × Wood Stain Optional, but makes the base look better
1 × Aerosol Sealant To protect base
4 × Foam Feet Protects the surface it sits on