Quantity   Component name
1 × Raspberry Pi + power cable
1 × Raspberry Pi Camera v1.3 + 50cm ribbon cable The default 15cm ribbon cable is not long enough.
1 × 180 degree SG90 servo Because of the camera ribbon, I restricted the servo to only 180 degrees.
3 × 10mm RGB LEDs with common cathode
1 × cables
4 × M2 screws to attach the camera
1 × speaker Optional if you want music. I used a 4Ω 2W speaker with connected aux in. You can use any speaker you can connect to your Pi.
1 × guardian head https://www.thingiverse.com/thing:6027280
1 × decorations for the head https://www.thingiverse.com/thing:2387723
1 × guardian body, base cover, claws, and leg segments https://www.thingiverse.com/thing:2391826
1 × shine-through filament To make the guardian’s lights shine through its body, use filament that allows the light to shine through and paint the parts that shouldn’t allow light to shine through.
1 × primer & acrylic paint I ordered armour modelling paint but found that mixing my own colors from a regular acrylic paint set worked best for me.
1 × modeling grass, stones, glue The Army Painter makes a Battlefields Basing Set which comes with all of this.
1 × a base for the guardian I used a wooden disk with a hole cut in the middle and a box with a hole in the top underneath.
1 × ground texture If you want the base to look more natural, you can use Vallejo Ground Texture Acrylic or something similar to create patches that look like stone.
1 × wire To allow you to position the legs better, you can thread wire through them.