bottom-mold.stlThe bottom part of the 2-part resin mold for the skirtStandard Tesselated Geometry - 12.69 MB - 07/24/2023 at 11:47 |
|
|
top-mold.stlThe top part of the 2-part resin mold for the skirtStandard Tesselated Geometry - 12.75 MB - 07/24/2023 at 11:47 |
|
|
shell.stlThe outer resin shell of the goggles.Standard Tesselated Geometry - 9.53 MB - 07/24/2023 at 11:47 |
|
|
bottom-plate-v2.dxfBottom plate of the overmoldAutoCAD DXF - 57.61 kB - 07/24/2023 at 11:47 |
|
|
back-clip.stlClip for the elastic band to attach the goggles.Standard Tesselated Geometry - 454.87 kB - 07/24/2023 at 11:47 |
|
|
left-right-plate-v2.dxfLeft/Right plates of the overmoldAutoCAD DXF - 23.30 kB - 07/24/2023 at 11:47 |
|
|
lens-clip.stlClip for lens assemblyStandard Tesselated Geometry - 367.49 kB - 07/24/2023 at 11:47 |
|
|
front-back-plate-v2.dxfFront/Back plates of overmoldAutoCAD DXF - 52.57 kB - 07/24/2023 at 11:47 |
|
|
top-plate-v2.dxfTop plate of overmoldAutoCAD DXF - 60.99 kB - 07/24/2023 at 11:47 |
|
|
lens.svgPath to cut lensessvg+xml - 12.08 kB - 07/24/2023 at 11:47 |
|