Quantity   Component name
1 × SainSmart 3.2" SSD1289 https://www.amazon.com/SainSmart-3-2-Inch-SSD1289-Arduino-Raspberry/dp/B008FWSG3S
1 × Teensy 3.6 https://www.pjrc.com/store/teensy36.html
1 × Tall Dog Teensy 3.6 standard adapter https://www.tindie.com/products/loglow/teensy-3536-breakout-revision-a-standard/
1 × ESP8266 ESP-01
1 × Parallax 27800 Joystick, 2-Axis, 1.64" x 1.2" x 1.1" https://www.amazon.com/gp/product/B00B88H6WS/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
1 × "Tall" 2x20 female header https://www.adafruit.com/product/1992
2 × Brass M2.5 Standoffs 16mm tall, 2 pk (actually need 3 standoffs total) https://www.adafruit.com/product/2337
1 × SPDT through-hole switch https://www.adafruit.com/product/805
1 × speaker I used https://www.adafruit.com/product/3351
1 × 18650 battery holder I bought this 2-pack - https://www.amazon.com/gp/product/B00FGX8NVO
1 × 18650 battery & charger https://www.amazon.com/gp/product/B0129F9BXK
1 × 10k ohm resistor
1 × 20k ohm resistor
1 × 0.1uF disc capacitor
64 × 6mmx6mm momentary pushbutton switches
1 × CR2032 battery holder Perhaps this -- https://www.amazon.com/Velleman-BH-001-Battery-LI-CELL-Diameter/dp/B002BJ5JZ4/
1 × CR2032 battery
1 × 3-pin header for printer port (optional)
1 × 2-pin male header & jumper for display select (optional)
3 × M2.5 screws (for display)
1 × Micro SD card (I'm using an 8GB card)
1 × custom PCB...