Patriot Companion

My Digital Electronics class is building a programmable test board with various sensors and controllers. Our school mascot is the Patriot.

Similar projects worth following
Our project is an experimental board in the spirit of Arduino based on the ATMEGA32. We will be adding several sensors and motor controllers to the Patriot Companion. We are doing schematic and PCB layout in KiCAD. Once we have our boards printed we will be making our first foray into surface mount soldering.

Details go here

kicad_mod - 4.15 kB - 04/17/2017 at 15:50



LM398 S08 op amp footprint

kicad_mod - 1.24 kB - 04/17/2017 at 14:53


kicad_mod - 303.00 bytes - 03/30/2017 at 16:03


kicad_mod - 1.36 kB - 03/29/2017 at 15:46


kicad_mod - 1.40 kB - 03/29/2017 at 15:42


View all 16 files

  • 1 × Dc Motor Controller
  • 1 × NXP MMA8652FCR1 Semiconductors and Integrated Circuits / Misc. Semiconductors and Integrated Circuits

View all 15 project logs

Enjoy this project?



warhawk-avg wrote 05/18/2017 at 03:30 point

Cool!  Whats it do?

  Are you sure? yes | no

Dylan Miracle wrote 05/23/2017 at 18:19 point

It should run a couple motors, have a temperature and humidity sensor, has a few neopixel LEDs, servo output and a few analog and digital i/o lines. We should be getting the boards today and soldering by the end of the week!

  Are you sure? yes | no

Similar Projects

Does this project spark your interest?

Become a member to follow this project and never miss any updates