Instructions | Make Your Own Google Voice HAT

Clone the project onto the pi

git clone https://github.com/shivasiddharth/custom-voice-hat

2
Turn on i2s support in /boot/config.txt with:
****Uncomment the following****
```
#dtparam=i2s=on #dtparam=i2c_arm=on #dtparam=spi=on #dtparam=audio=on  
```
****Add the following new entry****
```
dtparam=i2c_vc=on
```
Save Exit and Reboot.
3
Check for the Hats folder:
```
cd /proc/device-tree/
```
You will not find the HAT folder. this shows that the HAT has not been detected yet.
4
Open a new terminal and change directory to eepromutils:
```
cd /home/pi/custom-voice-hat/eepromutils 
```
5
Make the EEPROM flasher executable and Flash the EEPROM with the eeprom file:
```
sudo chmod +x ./eepflash.sh sudo ./eepflash.sh -w -f=voicehat.eep -t=24c32
```

Update raspberry pi kernels:

sudo apt-get update 
sudo apt-get install raspberrypi-kernel

Install the audio configuration scripts

cd /home/pi/custom-voice-hat/audio-config/scripts/

#Make the scripts executable:

sudo chmod +x ./custom-voice-hat.sh sudo chmod +x ./install-i2s.sh

#Run the Executable scripts:

sudo ./custom-voice-hat.sh sudo ./install-i2s.sh

Make Your Own Google Voice HAT