A.T. Workshop @ Supercon'17

A place to discuss the cellular AT command workshop from SuperConference 2018

Similar projects worth following

At SuperConference we went on a journey to discover how to interact with cellular modules at a low level, using AT commands.

During the workshop we ran into some issues preventing most users from completing the project.  This HaD project was created to carry on the conversation, to offer support and share updated code.

Python script showing how to set up a network connection, send and receive data.

x-python-script - 5.34 kB - 11/12/2017 at 22:13


SIM800 Series_AT Command Manual_V1.09.pdf

AT Command Manual for the SIM800 module.

Adobe Portable Document Format - 3.07 MB - 11/12/2017 at 22:10


Workshop Schematic.png

Breadboard wiring schematic

Portable Network Graphics (PNG) - 1.45 MB - 11/12/2017 at 22:09


  • Workshop Follow-up...

    Ben Strahan11/12/2017 at 22:27 1 comment

    Hi crew! We had a killer workshop on Day-1 of SuperCon'18. Unfortunately the majority of us did not get our devices communicating with the Hologram cloud. 

    Good news! I went back, discovered the issue, patched the code and added the ability to receive inbound data.

    I've update the GitHub repo with the new code plus added it to this project. Curious to hear how this new code base goes for everyone.



View project log

View all instructions

Enjoy this project?



Similar Projects

Does this project spark your interest?

Become a member to follow this project and never miss any updates