close-circle
Close
0%
0%

Sukasa

I like software, electronics, and making stuff. Pretty good at C#. I work in building automation.

location
BC, Canada
Following
Send a private message
Similar accounts worth following
close
3 Followers
30 Following
4 Projects
25 Likes
sukasa
Send a private message
eye
4.5k
users
31
comment
4
skull
16
A Netduino-based solder reflow oven built from an old toaster oven
Project Owner Contributor

Reflow Oven

Sukasa

eye
2.7k
users
260
comment
0
skull
6
ESP8266-equipped decorative lamp
Project Owner Contributor

WiFi LED Lamp

Sukasa

eye
1.4k
users
4
comment
0
skull
3
Team-built soldering 8-point fume extractor
Project Owner Contributor

Fume Extraction Station

Sukasa

eye
836
users
2
comment
0
skull
0
An edge-lit frame with silicon wafers on display, using NTP time to control brightness
Project Owner Contributor

Wafer Frame

Sukasa

eye
195
users
2
comment
0
A friendly, big, clean hackerspace in Nanaimo
Project Owner Contributor

MakerSpace Nanaimo

Sukasa

eye
27.4k
users
211
comment
29
skull
148
Xilinx ZYNQ based RPi
Project Owner Contributor

ZynqBerry

Antti Lukats

eye
14.5k
users
3.5k
comment
2
skull
41
Open-source IoT platform
Project Owner Contributor

mqopen

Ivo Slanina

eye
12.2k
users
442
comment
18
skull
51
Small audio interface for adding a digital channel to an analog mixer.
Project Owner Contributor

Square Inch USB Sound Card

Jacob Creedon

eye
11.5k
users
1.3k
comment
5
skull
42
An Arduino Nano mount that fits on the battery of a Baofeng UV-5R or BF-F8.
Project Owner Contributor

Baofeng Arduino Backpack

Tim

eye
8.4k
users
707
comment
4
skull
36
A full-featured modular synthesizer • aka "The Alligator"
Project Owner Contributor

DIY Modular Synthesizer

chrisbeckstrom

eye
6.4k
users
876
comment
0
skull
19
Measure energy consumption with Arduino
Project Owner Contributor

Energy monitor with Arduino

Victor

eye
4.9k
users
60
comment
12
skull
34
DISPENSER V5 for Manual solder Paste application (without compressed air) to PCB for reflow soldering or Hot-Air Soldering techniques.
Project Owner Contributor

Solder Paste Dispenser V5 - AIR FREE & 5V USB-NEW!

MikeM

eye
4.3k
users
119
comment
2
skull
14
An eight zone Wifi accessible, sprinkler valve controller based on an esp8266.
Project Owner Contributor

WiFi Lawn/Garden Sprinkler Controller (ESP8266)

Kevin Uhlir

eye
2.7k
users
545
comment
0
skull
12
An ESP-12 ESP8266 breakout board for your analog RGB ledstrips, floodlights and digital ledstrips
Project Owner Contributor

EspLight

Michiel Brink

eye
1.9k
users
1.3k
comment
0
skull
13
Using 3Dprinting and 3Dmodelling I managed to teach KUKA robot to weave carbon fibre constructions coated in resin.
Project Owner Contributor

KUKA robot weaving with carbon firbe

barbbasia

eye
1.4k
users
1k
comment
0
skull
2
Interface with SNES controller using Adruino over Serial or USB.
Project Owner Contributor

SNES Controller Arduino Adapter

zvodd

eye
1.4k
users
385
comment
9
skull
12
Neopixels are sweet! ☺ Driving them is a pain ☹ Stick in a picopixel and put the flashy on all the things!
Project Owner Contributor

picopixel

usedbytes

eye
856
users
467
comment
0
skull
4
Dockable bluetooth sink.
Project Owner Contributor

El Radio 2

Jeremy Lambert

eye
798
users
490
comment
0
skull
3
Build a portable Pi laptop with built in breadboard space and solar charging.
Project Owner Contributor

Travelling Pi Laptop

Ted Varty

eye
792
users
1.2k
comment
3
skull
9
A rear speaker from a surround system is retro-fitted with a 10w amp and a Bluetooth audio (A2DP) module
Project Owner Contributor

Bluetooth Speaker (retro-fit)

ronald

eye
563
users
1.3k
comment
0
skull
7
POISED is a laser scanner - a camera and a projector: captures images using one laser, and in real time another laser renders those images
Project Owner Contributor

POISED- Parallel Optical Imaging SystEm Device

hannah.mishin

eye
349
users
1.2k
comment
0
skull
3
Automate your Makerspace with an electronic lock and 1sheeld
Project Owner Contributor

JMoon MakerSpace Automation System

Jasmeet Singh

eye
296
users
1.8k
comment
0
skull
4
How to build an Arduino-based IoT Gauge with a REST API, and connect it to the IFTTT Maker Channel via the Yaler.net relay service
Project Owner Contributor

IoT Gauge with Arduino, Yaler & IFTTT

tamberg

View all

Share this profile

Share

Bits

Radu Motisan wrote 01/15/2017 at 16:13 • point

Thanks for following the # Global radiation monitoring network. If you want your own unit, use this contact form: http://www.uradmonitor.com/join-the-network/

  Are you sure? yes | no

close

Send a private message to Sukasa

Become cool instantly

Create your Hackaday.io profile like Sukasa and many others

close

Report user as inappropriate

You are about to report the user "Sukasa", please tell us the reason.