Instructions | CANPi | Hackaday.io

1

Step 1

Get the PCB: http://oshpark.com/shared_projects/20v7dQka
2

Step 2

Get the components from your preferred supplier and solder the board.
This is a list with all the needed components at Mouser:.
http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=3BD03F3D2D
3

Step 3

Configure your Raspberry Pi following these instructions: http://lnxpps.de/rpie/
4

Step 4

Done!

Discussions

jl.dh1lh wrote 07/08/2014 at 20:41

can you share a shematic or bill of materials

Are you sure? yes | no

Eric wrote 02/07/2018 at 21:47

I'm interested in the KiCAD files as well. Are they available? Maybe GitHub? And I answered my own question. You can find the files here: https://github.com/RasmusB/CANPi
THANKS RusmusB, Nice work!

Are you sure? yes | no

CANPi

Discussions

Become a Hackaday.io Member