Close

OwnWatch

Back to project overview

The OwnWatch is a Arduino compatible smartwatch which is soft- and hardware expandable and not much bigger than a common brand smartwatch

Discussions

dunkyoung25 wrote 02/20/2016 at 08:47 point

Hi yes i would give this ago,have you relesed firmware?

  Are you sure? yes | no

Moritz Wenzel wrote 03/03/2016 at 01:58 point

Hi Dunkyoung25, thanks for showing your support! :) If you need PCB's or instructions/help just contact me via Email (moritz.wenzel96@gmail.com). No to be honest i haven't had time to write a more complex/advanced firmware for the watch yet, just some testing stuff, nothing that i would release not to mention that it wouldn't be worth it. But if you still want to build one and help writing a cool firmware, feel free to mail me.

  Are you sure? yes | no

alvintc24 wrote 12/31/2015 at 16:13 point

Please release instructions and parts I am willing to buy and make this.... 

  Are you sure? yes | no

Moritz Wenzel wrote 03/03/2016 at 01:55 point

Hey Alvintc24, sorry for my late reply, haven't been here for a while. The assembling itself is actually not that complicated, you would need the PCB's. If you should be seriously interested in getting a set of PCB's for the watch, just send me a short mail.(moritz.wenzel96@gmail.com) There is already a new undocumented version out there with many more nice features. Sadly i couldn't test it out yet not write a cool firmware. I was quite busy i the last few months. But if you still want feel free to mail me.

  Are you sure? yes | no

chetan wrote 12/21/2015 at 05:20 point

Hi moritz, very interesting project.. i would like to build one.. please share the build instructions..

  Are you sure? yes | no

hansurschel wrote 08/27/2015 at 12:59 point

Ja,ich würde die Uhr gerne nachbauen. Vor allem würde ich sie gerne programmieren.Schönen Gruss aus dem Saarland

  Are you sure? yes | no

radiusmike wrote 01/10/2015 at 06:22 point

Yes, I would be interested in building this.

Mike

  Are you sure? yes | no