Quantity   Component name
1 × 4K Action Camera Most likely a GoPro Hero 4 Black. Will be used to record the images
1 × Pix4D Software To stitch the images into a map
1 × 3mm Carbon Fiber Sheet To build the drone
1 × Naze32 32bit commercially available flight controller for quadcopters
1 × Ublox NEO 6M GPS GPS module that will be interfaced with the flight controller
4 × 2300 kV Brushless Motor Spins the propellors
4 × 14 amp Electric Speed Controller To control the RPM of the motors and turn the quadcopter
4 × 5x3 sized propellor 1 propellor for each motor to generate lift. 1kg of lift per motor
1 × 1300 mAh LiPo Battery Powers the quadcopter and should give 12 minutes of flying time.