Close

275 Results for "3D%20printing"

  • Review of JLCPCB's service
  • Hacker page     by Torbjörn Lindholm
  • Disclaimer: This review is sponsored by JLCPCB and the board was manufactured and shipped free of charge. However, the contents of this review has not been doctored, monitored or otherwise influenced by them. That is, I'm not paid to make this review....

  • Feb 2023 Update
  • Hacker page     by finallyfunctional
  • Over the past 8 months I've been making prototypes of many different VR locomotion devices. I've been trying out many different concepts, but now I'm starting to focus on one setup again.  Tldr I'll be expanding upon the leg exoskeleton concept...

  • 2019, A Year in Tools
  • Hacker page     by TwinkleTwinkie
  • Today I was talking with a friend about some difficulties we had with assembly with a particular part and I shared with him the tool I purchased to deal with the problem.  While going down my purchase history looking for the tool to share with my...

  • LaunchPad
  • Hacker page     by wiserleo
  • You said anything...so I thought I would see what happens when I share all the links from this Open Source GIS Tool website.  This is information that helps my project team work on our upcoming projects.  Enjoy!  Open Source GIS[Last...

  • RPLIDAR and ROS programming- The Best Way to Build Robot
  • Hacker page     by Elaine
  • As LIDAR becomes more and more popular in different areas, including self-driving cars, robotics research, obstacle detection & avoidance, environment scanning and 3D modeling etc., we’ve also got many inquiries about RPLIDAR recently. Why it's a good...

  • SXSW 2014 Hardware Guide
  • Hacker page     by Aleksandar Bradic
  • South by Southwest 2014 is approaching, bringing along the usual tech-startup-launch frenzy, streets filled with party buses and endless hordes of geeks drinking themselves into oblivion. Although Interactive traditionally draws from software crowds...

  • First adventures in the CNC milling world
  • Hacker page     by M.daSilva
  • Nothing I though worth writing a entire project about, it's a project I did last year, to get my feet wet with metal CNC milling. I built a Bluetooth speaker with cheapo eBay modules: Bluetooth audio module, audio amplifier, USB charger, boost converter,...

  • Swarm Robotics Platform Notes
  • Hacker page     by Owen Trueblood
  • What does it take to get a bunch of robots moving around on a surface under the control of a computer? Existing Platforms Kilobots (story) - Move on little stilt legs by vibration. Communicate with each other using reflected light. Various sources...

  • Sarah Petkus On Building A Cartoon To Go To Mars
  • Hacker page     by oshpark
  • @Benchoff  writes about @spetku and her Noodle Feet robot: Sarah Petkus On Building A Cartoon To Go To Mars Sarah Petkus is a robot mom (which means she’s the mother to a robot, not that Sarah herself is a robot, at least as far as we’re aware),...

  • Theatre
  • Hacker page     by Morning.Star
  • I had a most interesting phone conversation with someone from an organisation set up to help carers with a bit of funding, practical help with signposting, self-help and group therapies, counselling etc. Poor buggers, they have neither the training nor...

  • Three point clamped wedge secured laser cutter joinery
  • Hacker page     by zakqwy
  • On a few occasions I have had the need to secure something to a flat bit of laser cut wood. In all cases, I created precise shapes that allow me to rigidly and accurately grip the object while not depending on the exact dimensions of the cuts themselves....

  • Generating Nice Threads In OpenSCAD
  • Hacker page     by helge
  • [Hello future reader. This article refers to OpenSCAD 2018.05.05, please check if it still applies later on] 3D printing internal and external threads is interesting for many reasons. Unlike gears that invariably wear rapidly and cannot measure up compared...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday