Close

313 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기ð νeveningм셔츠룸후기선릉셔츠룸Ξthreshold 강남셔츠룸셔츠룸추천 셔츠룸후기シ셔츠룸후기㎩regular≡"

  • Arduino-programmable ARM Cortex M4F Boards

  • @Kris Winer of Pesky Products designed these easy-to-program, high-performance and low-power dev boards:Arduino-programmable Cortex M4F Development BoardsProgram an STM32L4 Cortex M4F with the Arduino IDE via USBTechnical specifications of the Butterfly...
  • GPS Clock by Nick Sayer

  • @Nick Sayer created this simple desk clock that gets time from GPS:GPS ClockGPS is best known as a ubiquitous, accurate poitioning system (obvious from the name), but the way it actually works requires distributing hyper-accurate time information. This...
  • eMMC to SD Card Adapter

  • From the Intelligent Toasters blog:Retro CPC Dongle – Part 18I’ve been working on, replacing the NAND raw flash with an eMMC chip on the CPC2.0 board.I wrote about raw flash and the challenges of writing a flash translation later in part 16 of this series....
  • burn firmware CY7C68013A on a Mac [nightly brain dump]

  • Warning: Only read if you want to flash and use the CY7C68013A module with sigrok on a mac! It all started six years ago with this article, written by @Mike Szczys: http://hackaday.com/2011/12/15/saleae-logic-analyzer-knockoff-hacking/ Once upon a time...
  • LCsoft Mini Board CY7C68013A in Sigrok on Mac

  • Four Euros for a 16 channel, 24MHz logic analyzer is a pretty good investment. At least that's what I thought when I read this article on hackaday.com in 2012. It talks about the LCSOFT mini board being a clone of a Saleae 8 Channel logic analyzer, but...
  • Versatile ATtiny Programming Adapter

  • Lucky Resistor designed this programming adapter for ATtiny13 and similar chips:A Versatile ATtiny Programming AdapterAs mentioned in my article about designing a cheap plant watering sensor, I built a small adapter which can be used to pre-program the...
  • Star Trek Communicator Badge

  • Joe Crop is a creating a real life version of this famous sci-fi device:Star Trek Communicator Badge In the true spirit of Star Trek, this communicator badge is completely autonomous, while fitting in the form factor of an original badge Star Trek was...
  • Ada Lovelace Fellowship for Open Hardware Summit

  • We are excited for the 2017 Open Hardware Summit this Fall in Denver, and we’re pleased to see the Ada Lovelace Fellowship is now open for applications: Ada Lovelace Fellowship Applications Now Open The Ada Lovelace Fellowship encourages women, LGBTA+,...
  • Giant nixie panel from USSR

  • Once in Internet I found photos of giant soviet panel named IGG1 (ИГГ1). It was looking stunning! This panel made in two versions:IGG1–32x32 with 32x32 dots resolutionIGG1–64x64 with 64x64 dots resolution Some technical data:Brighntness: 150–300 kd\m2;Minimal...
  • Inventory of all my chips

  • ChipQuantityDescription7417544 bit register with universal clock7417416 bit register with universal clock7417311+quad D flip-flop, tri state, asynchronous clear74451BCD to decimal decoder7416113pre/resettable 4-bit counter74hc147210-to-4 line encoder7415128...
  • PT8211 Audio Shield for Teensy

  • New OSH Park shared project from @Paul Stoffregen:PT8211 Audio ShieldPT8211 is an inexpensive 16 bit stereo DAC.This small breakout board connects the PT8211 to Teensy 3.2, Teensy 3.5 or Teensy 3.6.
  • E-Paper Breakout Board for Teensy

  • Breakout board designed in KiCad to connect Pervasive Displays 2.15" E-Paper (E2215CS062) to Teensy 3.2 or Teensy LC. Based Teensy E-Paper Shield by @jarek319 in EAGLE.The goal is to create a name badge that can be worn at conferences and Maker Faires....
  • Deconstructing Ping with C and NodeJS

  • I’m David, and my goal with this repository is to demystify the word protocols in enven more detail then my previous article called IoT-Raw-Sockets-Examples, and proving that there is nothing to hard to learn. We just need to pass through the unknown...Before...
  • Manual assembly of KiCad PocketBone

  • Success! Manual assembly of the KiCad-designed PocketBone by @Michael Welling with the Octavo Systems OSD3358 SiP (System-in-Package):BGA achievement unlockedMichael used vacuum pickup tool to manually place the components: He then used Reflowster to...