Close

1974 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기た 《〈 문의 OIO↗5793↗7458 》〉 ⑷plenty㎋셔츠룸후기셔츠룸후기んteeth 셔츠룸후기선릉셔츠룸 강남셔츠룸￦셔츠룸ⓤsilverⓞ"

  • What are the common gearbox failures?
  • Hacker page     by Mark Liu
  • The gearbox is composed of gears, transmission shafts, bearings and box structures. Because the box structure is sealed, it is generally not easy to fail. The failure mainly occurs in the gears, transmission shafts and bearings. Generally, the failure...

  • Solder
  • Hacker page     by MagicWolfi
  • Luke says: May 30, 2019 at 10:16 am The bismuth based solders would be nice, but they tend to be rare as hens’ teeth and expensive when you do find them from a local supplier. Also, the low melting point of 139 C is a little bit too close for comfort...

  • Why Flexible PCB is dominating?
  • Hacker page     by elizabethjones4256
  •   The main purpose of flexible PCB is to diminish the use of cables as well as connectors from various electrical devices. In this way, it also proliferates the reliability of the electronic system and helps us to reduce cost by the means of saving...

  • Artificial Muscles Brain Dump
  • Hacker page     by zakqwy
  • I engaged in some serious whiteboard tangenting last night on the subject of artificial muscles. Keep reading if you're bored as hell; this is a long-winded post.I also took a bunch of close-up pictures, most of which ended up pretty blurry. My D40 never...

  • CoreXY Mechanism
  • Hacker page     by Shane Hooper
  • CoreXY Mechanism CoreXY Mechanism CoreXY Kinematics The corexy parallel kinematics mean's that the motors are the largest source of inertia within the system, and are stationary. This means rapid acceleration because the two stepper motors provide a...

  • My first steam engine
  • Hacker page     by benguru
  • Just wanted to share pictures of the very first steam engine that I made during the summer !!This is the Schaublin milling machine that I use to machine most of my parts.Here in Switzerland Schaublin is a pretty famous brand especially for metal lathes.That...

  • Amazing Details About The Gerenuk
  • Hacker page     by Gary S. Poole
  • Here are several gerenuk facts that'll make for an appealing read. Gerenuks Fact #1:Gerenuks are bigger than you may well fully understand.The average gerenuk height varies from 80 to 105cm. In inches, that is about 30 to 40 inches, give or take one...

  • Product Reviews
  • Hacker page     by Craig Hissett
  • In a few days I will hopefully be receiving a wonderful package from Totem, and I can't ruddy wait! I came across the company a month or two ago while looking for an alternative to 20x20 aluminium extrusion for my #Digibone  project on here;...

  • 5 Devices to Give You a Perfect Gaming Experience
  • Hacker page     by Eva Hansen
  • Nowadays, there is a myriad of ways to roll the dice, play some cards, or connect to the world’s finest slot machine offerings from the comfort of your home. The best online games platforms are willing to bend over backwards to win you over as a customer,...

  • Dysgenesis of the Corpus Callosum
  • Hacker page     by Morning.Star
  • In the Autumn 22 years ago, my eldest daughter was born. She looked perfect, and did all the things babies should do, for a little while at least. But she didn't sit, took 4 years to learn to walk and has never said anything more than 'B'. What little...

  • SG-90 Hobby Servo
  • Hacker page     by deʃhipu
  • SG90 is one of the cheapest and most common hobby servos available. That is probably because it's also the most commonly cloned hobby servo. If you bought one of these very cheap. there is a very good chance that it wasn't actually produced by Tower...

  • Differences between Stepper Motors and Servo Motors
  • Hacker page     by Mark Liu
  • Both stepper motors and servo motors are servo units for motion control purposes, which can precisely control the location and speed of motion mechanisms.To adapt to the development trend of digital control, stepper motors or all-digital motors are mostly...

  • planning winter projects and stuff
  • Hacker page     by davedarko
  • While working long hours wishing for some time to tinker again, I was shopping a lot of stuff the last two or three months. So once again I will compile a list of projects I might tackle in the future. This list is also for me because I forget things...

  • Radio Tom Swifties
  • Hacker page     by chipveres
  • "I calculated the inverse of the impedance," Tom admitted. "I tuned in Glen Miller's Orchestra!" Tom cried with abandon. "I want to go solo," said Diana Ross, making a Supreme sacrifice. "I can't find the obsolete navigation station," Tom said disCONSOLately....
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday