Close

126 Results for "%E3%80%8A%EC%B5%9C%EC%A0%80%EA%B0%80 O1O%CE%9E5793%CE%9E7458%E3%80%8B %EA%B0%95%EB%82%A8%EC%95%84%EC%9D%B4%EB%A6%B0%EC%8B%9C%EC%8A%A4%ED%85%9C%E3%86%8B %EA%B0%95%EB%82%A8%EC%95%84%EC%9D%B4%EB%A6%B0%EC%85%94%EC%B8%A0%EB%A3%B8applause%EA%B0%95%EB%82%A8%EC%95%84%EC%9D%B4%EB%A6%B0%EC%8B%9C%EC%8A%A4%ED%85%9C%EA%B0%95%EB%82%A8%EC%95%84%EC%9D%B4%EB%A6%B0%EC%8B%9C%EC%8A%A4%ED%85%9C%EC%8B%A0%EC%82%AC%EC%95%84%EC%9D%B4%EB%A6%B0%EC%A3%BC%EB%8C%80caught %EA%B0%95%EB%82%A8%EC%95%84%EC%9D%B4%EB%A6%B0%E3%8F%87%E3%85%97%EA%B0%95%EB%82%A8%EC%95%84%EC%9D%B4%EB%A6%B0queer"

  • ESP8266 OLED Board

  • MicroUSB-powered ESP8266 OLED Board (omiker0’s Blog)I created this design as a challenge to make a design under 1″ x 1″ in size.ESP8266 Oled Board Rev3by miker
  • Repurposing IDE-Cables (even for video!)

  • Briefly: 80-wire IDE cables are *great* for high-speed stuff... But the pinout is a bit more difficult than a straight-through 40-wire IDE cable, because the 80-wire cables have shielding (yay!) which is connected to specific pins designated as ground,...
  • Custom battery packs, ugly spot welder

  • I needed a 7.2V battery pack for an ongoing project. Too lazy to go and buy pre-made packs, I made my own. The cells are bog-standard Lithium-ion 18650s recovered from laptop battery packs. I cycled them twice with an Accucel charger to check the capacity....
  • Amazing Details About The Gerenuk

  • Here are several gerenuk facts that'll make for an appealing read. Gerenuks Fact #1:Gerenuks are bigger than you may well fully understand.The average gerenuk height varies from 80 to 105cm. In inches, that is about 30 to 40 inches, give or take one...
  • The 0.70 € STM8 Board

  • The 0.70 € BoardSo you ordered your super cheap stm8 dev board from aliexpress oder eBay and now you want to do at least a blinking LED, then this Mini Tutorial is exactly for youHardwareThe STM8S103F3 dev boardJust in case you do not have your...
  • STM32F107RCT6 Microcontrollers Datasheet

  • Product Overview The STM32F105xx and STM32F107xx connectivity line family incorporates the highperformance ARM® Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, highspeed embedded memories (Flash memory up to 256 Kbytes and SRAM...
  • low consumption motor

  • Low consumption motor Objective : to build an electric motor operated under low power (voltage and current) , powered by a single small solar panel which can operate in the artificial light and which can be transformed in a small electric dc generator....
  • How to deal with the heating problem of stepper motor?

  • 1. Causes of motor heating   For any stepper motor, it is normal to generate heat during operation, and the same is true for stepper motors. The inside of the stepper motor is composed of an iron core and a winding coil. The resistance of the...
  • Teasing a few GPIO lines from a UART

  • So you have an old microcomputer board that has a UART but no PIO. Maybe one like mine. No chance then of driving a couple of digital I/O lines unless you add a PIO chip? Hmm, let's look at the data sheet for the Intel 8251, a typical UART of a...
  • Omni-Sphere

  • In this article I'm going to go over a 2in diameter omnidirectional sphere I designed.  Prior Designs and Builds The design is based of what is shown in this video. This video shows the same design, but scaled up and 3D printed. Requirements...
  • Arduino-programmable ARM Cortex M4F Boards

  • @Kris Winer of Pesky Products designed these easy-to-program, high-performance and low-power dev boards:Arduino-programmable Cortex M4F Development BoardsProgram an STM32L4 Cortex M4F with the Arduino IDE via USBTechnical specifications of the Butterfly...
  • Running List of DIY Stickvise Builds

  • Tactical Snacks made his own and it appears to be well designed and made from some parts ordered through Protolabs.http://tacticalsnack.blogspot.com/2017/03/little-stick-vise.html?m=1A pretty cool Stickvise inspired tool was made by pa4tim in the Netherlands. ...