Close

75 Results for "keyboard"

  • SoCal Mechanical Keyboard Meetup

  • April 2 was the 3rd or 4th SoCal mechanical meetup at the Datamancer workshop in Montclair, California. Here are a few pictures:DatamancerDatamancer was kind enough to open up their workshop to the geekhack, deskthority, and /r/mechanicalkeyboard community....
  • Keyboard Controller with Joystick for MSX

  • I have built the Atari 2600 controller keyboard DIY to develop an adapter and write a driver for MSX. The adapter aimed for simplicity but it does not provide any detection feature, requiring the user to without an action, either pressing a key or move...
  • Keyboard Controller with Joystick for MSX (2)

  • Added a second diode to enhance the detection And drafted some driver code that provides scan and decode that takes 98 bytes plus 5 RAM addresses. ; Scan Atari keyboard and single button joystick using ; and adapter with 74LS139 ; PSG IO addresses PSGAD:...
  • Atari Keyboard Controller adapter for MSX (2)

  • For a matter of symmetry and sake of schematic drawing I have rearranged the wiring, so the MSX pin 8, a push-pull output became an open collector with pull-up resistor, then the pins/rows assignment became ROW /  (Keys)MSX Joystick PinKeyb. Contr....
  • Restoring a rubber-dome IBM Model M2 keyboard

  • Not a project, but wanted to share something I did the other day. Emma, my trusty Model M keyboard has been ill with a case of rotten membrane contacts since the day I was given her for free. Some conductive ink helped mitigate it, but without a proper...
  • Pre-MIDI MUSIC for the Apple II (1/2)

  • I have a small collection of keyboards designed to plug into the Apple II.The Passport Designs Soundchaser keyboard is a four octave keyboard, typically paired with the Mountain Computer Music System board set.  It can do 16 voices, in any...
  • [WORK JOB] - Test Jig No.1

  • Given existing test hardware and a complete assembly, I was tasked withcreating a μcontroller control module for automation.Features/interactions include an RS-485 MODBUS line, a USB keyboard,an LCD screen and an SD card reader.
  • PROJECT LOG 10/4/2018

  • Project Log 10/4/2018 ================== Here is a chart of the layout of the Synchronia♥Duet Harmony Keyboard:Holding down the M key sets the keyboard for Major Chords, m for Minor Chords, etc. The left hand would press the M, m, S4, D7 (up for higher...
  • Ninja Tap patch for Rock'N'Roller (MSX1)

  • After a suggestion from [gdx] from MRC I took a look at the Rock'N'Roller (MSX1) and started to work on a patch for Ninja/Shinobi Tap multi controller adapter. First step was to disassemble the game and figure out how the game deals with the controls....
  • Hamdeck Is a Rugged Cyberdeck Optimized for Amateur Radio

  • Kaushlesh C. designed Hamdeck to survive adventures in the outdoors, so he built it into a hard waterproof Pelican-style case. When closed, it is almost impervious to the elements — though some drilled holes probably make it a bit more susceptible to...