Results for 3D%20printing

Hack Chat Transcript, Part 2
Log from Electromyography Hack Chat
Daren Schwenke12:41 PMwith ultrasound you probably wouldn't be measuring the nerve activity you'd be measuring the actual contraction of the muscle, but it might fill in the gaps.. hut12:42 PMDidn't know you could use ultrasound for that, that's fascinating...

Project Log 61: DIY Electric Motor⁴.
Log from DIY Mech/Exoskeleton suit.
Tuesday, 11/07/2023, 17:54. Well, I believe this will be my last project log on "theorics" of electric motors, and if you didn't notice, that's more or less "my last attempt", first I will list everything I need to do, then later I will make project...

closer to all-in-one: first try building in new box
Log from Minamil 3dp: another minimal CNC mill
This log entry describes a completely new enclosure that I kind of accidentally built in the middle of getting this 3d printed re-do of the CNC mechanics to work well enough to believe that it would actually work. I've copied it here from #"Desk Accessory"...

Getting Going -mind my box going to line all the containers pulling every fin every heat transfer pipe out all the US and the neighbors always been I have access to rich people's e-waste wowE-Waste
Log from Cyberdeck for 2024 Challenge
I have three different size waterproof felony cases one has the wheels and is kind of Deep and already has means and an Ethernet Jack but they're not ip6 and they've cut to me that holes in them and I don't like it the way it is not very waterproof and...

Code for Cubic Bezier Version
Log from Fitting a Quadratic Bezier Curve to Point Data
Cubic Code Results While the results are good it is not exact like the piece-wise quadratic bezier code.I quess a fourth order bezier would bit better.Hers is the cubic match:Note the bezier cuves are too wide just aft of the maxium beam and too...

Solving Towers of Hanoi recursively in 80 nibbles
Log from Exploring the Science Fair Microcomputer Trainer
As Michael mentioned, he somewhat nerd sniped me with the the idea of squeezing a Towers of Hanoi solver in not the Science Fair Microcomputer Trainer. As an avid fan of both the Gakken FX R-165 and the Science Fair Microcomputer Trainer, I could't let...

PCB Hack Chat with OSH Park Transcript Pt. 2
Log from PCB Hack Chat with OSH Park
Jasmine Brackett Last question from @Dirty Engineer - "Is it possible to add a "Thanks" button in the shared project section?"oshpark good idea... we have redesign in the worksoshpark and we'll keep that in mind.Dan Sheadel A "thanks" button is on our...

Pulser-sequencer
Log from Clockwork germanium
Remember the last logs : the goal is to use as few transistors as possible to send a string of consecutive non-overlapping pulses to several pass-gates. Here the design uses NPN as primary type but it will be reversed later because PNP are the majority...

(edited) Transcript for RF HackChat
Log from RF Product Design HackChat
Dan Maloney says:13 minutes agoHey Jenny13 minutes agothanks for coming :)Jenny List says:13 minutes ago(Well, it is here, anyway)Les Hall says:13 minutes agooh Jenny is in europe i presume then?Dan Maloney says:13 minutes agoBlimey, yesJenny List says:13...

Open Source Chip Design Hack Chat Transcript
Log from Open Source Chip Design Hack Chat
Jack Kang Sure, hi everybody! My name is Jack and I am VP of Product and Business Development at SiFive. before SiFive, I started my career as a front end chip designer, working on bus controllers, memory controllers, and CPUs. then moved into product...

Climate Change Hack Chat Transcript
Log from Climate Change Hack Chat
Tito Jankowski about me: I've been a biohacker, a hardware manufacturer, a medical device designer, a patent infringer, and a sailor. Prior to launching Impossible Labs, I co-founded the BioCurious hackerspace, built an open source biotech device called...

Open Source Startup Lessons Hack Chat Transcript
Log from Open Source Startup Lessons
Shulie Tornel Alright, let's get started! Shulie Tornel Welcome to the #HackChat everyone! Thank you so much for joining us @zakqwy Julien Provenzano Hello Shulie Tornel zakqwy Sure! Glad to be here. Lots of good questions on the spreadsheet. Shulie...

Hack Chat Transcript, Part 3
Log from From Software to Tindie Hack Chat
Kris Winer12:48 PM@Josh Lloyd Of course... Josh Lloyd12:48 PM@Kris Winer I'm starting a new low power ESP32 project, I'll keep your power requirements in mind. How often do you need to capture a sensor reading? Sophi Kravitz12:49 PM@Brian Lough I liked...

Hack Chat Transcript, Part 3
Log from DIY Radio Telescopes Hack Chat
Joseph Eoff12:45 PMWhile we're on the subject of data, is there standardized format for collecting data and metadata? Frank12:45 PMfor example I might build a station out of curiosity, but then it may lie dormant for days or weeks while my real job...

Hack Chat Transcript, Part 3
Log from Amateur Radio Homebrewing Hack Chat
Charlie Morris ZL2CTM12:47 PMI do reuse some stages, but more often than not I simply reuse the componts. Wa6ara12:47 PMAlso, build the fittings jto support the pots, caps and switches using a 3d printer Charlie Morris ZL2CTM12:47 PMI don't tend to...

8219 Results for "3D%20printing"