Close

6880 Results for "《 예약문의 OIO↗8489↗8306》선릉레깅스┛Еimportanceム강남레깅스룸레깅스룸ㅂheavenly 레깅스룸강남레깅스 강남레깅스룸⊥선릉레깅스ゥfiercelyり"

  • Steering Wheel One
  • Details     from Steering Wheel One
  • by tEEonEIntroduction I love racing games, and along with the Xbox One came Forza 5!The few steering wheels for XB1 are super expensive and bulkyThe XB1 controller is a new device and i was dying to take one apartI had a spare SRW-S1 lying aroundI thought...

  • rbServo
  • Details     from rbServo
  • This is a modification of a standard RC servo. My development is done on the cheap, metal geared TowerPro MG995. The controller board is replaced with a more advanced controller with support for CAN. This enables position feedback, motion profiles,...

  • Peril-Sensitive Sunglasses
  • Details     from Peril-Sensitive Sunglasses
  • This entry is a general writeup along with post-prototype observations.TO READ THE PROJECT PROGRESS FROM START TO FINISH (WITH PICTURES), CLICK HERE and start reading from the BOTTOM. This will let you read how the project came to life, the decisions...

  • Home security
  • Details     from Home security
  • This project should replace standard home security alarms, and And function as gateway to pass or receive data from various sensors. All configuration is done over nice web interface.Gateway board consists of atmega1284P that has inputs for sensors and...

  • 10$ curve tracer
  • Details     from 10$ curve tracer
  • There is not very much magic behind this curve tracer. It works by impulse measurement - so, the voltage (or current) to draw IV curve is not applied step by step by means of adjustable voltage (or current source), but in single impulse from charged...

  • Mako DSP
  • Details     from Mako DSP
  • Mako DSP Board Prototype 2.0 Specs: NXP LPC4337 ARM Cortex M4F/M0 204MHZ Asymmetrical Dual-Core BGA256Alliance Memory AS4C8M16S SDRAM 128MBITArduino Leonardo Hardware Compatible PinoutTwo 10 pin additional GPIO banks for more I/OWolfson Audio WM8778...

  • Garage CNC Workshop
  • Details     from Garage CNC Workshop
  • Sound Dampening PanelsSound is an issue with any workshop, power tools are cool but make lots of noise. My workshop has the added benefits of being in a garage, close to neighbors and harboring a CNC table. My primary concerns are the air compressor,...

  • PIC Controlled Time Lapse Camera
  • Details     from PIC Controlled Time Lapse Camera
  • OK, so this one started about 3 years ago. I had an old digital video camera (that also takes stills). Unfortunately the maximum video resolution is 640x480 and stills are taken at 3MP, so not a lot of use by today's standards (my phone can do better). So...

  • Solar Charging LiPo Project
  • Details     from Solar Charging LiPo Project
  • I used a separately powered mbed microcontroller to read the voltage across the battery terminals every 15 minutes. The solar panel has good exposure to the southern sky out the back of my window. I regulated the voltage from the panel down to 5V because...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday