Close

152 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸ヒ 《〈 문의 OIO↗5793↗7458 》〉 ㎛beforehandム셔츠룸후기셔츠룸후기╇pen 선릉셔츠룸셔츠룸가격 셔츠룸‰강남셔츠룸㉦nestㅳ"

  • Reflow Oven
  • Details     from Reflow Oven
  • Where it isWant to check out the reflow oven? Drop by MakerSpace Nanaimo!The BrainsThe reflow oven uses a Netduino Plus 2 as its main microcontroller. This board directly connects to most of the hardware in the oven. The only things it doesn't connect...

  • Zero Entertainment System
  • Details     from Zero Entertainment System
  • Project Brief:Shoehorn a Raspberry Pi Zero into a NES controller. Load it up with RetroPie and wire up the buttons.Requirements:#RequirementJustificationStatus1System must be completely contained in a NES controllerA single-unit system is the main aim...

  • AVR controlled espresso machine
  • Details     from AVR controlled espresso machine
  • The final version of the firmware has the following features:Configurable brew and steam temperatureConfigurable grinder timerAudible beep when temperature for selected mode is reachedAuto-flush when switching from steam to brewGrinder-only mode with...

  • Retrofit Robot
  • Details     from Retrofit Robot
  • The goal of the project is to keep the original look of the robot while adding some new cool functionality to the old construction. The robot will be controlled with some form of bluetooth controller in the beginning for testing and in the end I plan...

  • Patient Alpha
  • Details     from Patient Alpha
  • Remember those 80s keychains with the laser noises? Some were called the Executor, The Echo Keyller, Thriller, and some other names. This was my first real circuit bending project (that's why I called it Patient Alpha) and might be of interest to those...

  • XL heated bed
  • Details     from XL heated bed
  • Inline pics to be added later.I have been printing on a ceramic floor tile with decent results as long as it was warmed first (heat gun). As I didn't want to destroy my only working printbed, I looked around for something similar locally. Nothing was...

  • PressDrill 9000
  • Details     from PressDrill 9000
  • PROBLEM:Not everyone can own a pcb mill or a cnc machine. Sometimes using a dremel to drill holes becomes tedious. If you are like me an etch your own pcb prototypes, drilling the holes is sometimes the reason you buy pizza a case of energy drinks and...

  • deathbots
  • Details     from deathbots
  • Currently we have two chassis.   tracked excavator hull with the bottom-most portion of it's digger arm remainingoff-road "rock-crawler" style with a futuristic buggy shell Both have motors, radio receiver boards, motor drivers, etc. The tracked...

  • toggl.com project tracking box
  • Details     from toggl.com project tracking box
  • How to build the boxGet all the components from the component list. Solder 11 10k resistors (any value between 1k and 50k should do) in series to create a voltage divider with 12 voltage levels. One end goes to 3.3V, the other to GND. Each voltage level...

  • ATMEGA 2 - 8 DEVELOPMENT BOARD

  • Details     from ATMEGA 2 - 8 DEVELOPMENT BOARD
  • Component values are on the schematic. The PCB is 10cm x 15cm or 4in x 6in single sided. The LCD is attached via 16pin header and socket. Note the RW pin on the LCD is soldered to ground as this is how BASCOM addresses the display. You may want to change...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday