Close

4059 Results for "↘ 최저가 Ò1Ò〈⑻⑷89〉83Ò⑥ ↗ 강남쓰리아워㎰ 쓰리아워fearful쓰리아워레깅스룸쓰리아워강남술집정보constructed 쓰리아워가격ペゴ쓰리아워wealthy"

  • CANPi
  • Details     from CANPi
  • What is it?Here you'll find the hardware design files for a CAN controller for the Raspberry Pi SBC.It is designed to be easy to use. The CAN transceiver keeps the RPi and the CANPi elctrically isolated, so you do not need to worry about voltage levels....

  • The Quub
  • Details     from The Quub
  • QUUB is an open-source, micro controller system based on a core processor, addressable daughter boards, and remote IO modules. It is a general-purpose embedded microprocessor system, the form factor is based on a main MCU board and multiple stacked...

  • Midi Foot Pedals
  • Details     from Midi Foot Pedals
  • An original xbox controller has 8 channels of low-res analog, 4 channels of hi-res analog, and 8 channels of digital inputs.I tied the low-res channels to my front row of pedals.  Soldered a wire to a bit of pcb, ran the wire through the resistive...

  • Steering Wheel One
  • Details     from Steering Wheel One
  • by tEEonEIntroduction I love racing games, and along with the Xbox One came Forza 5!The few steering wheels for XB1 are super expensive and bulkyThe XB1 controller is a new device and i was dying to take one apartI had a spare SRW-S1 lying aroundI thought...

  • Cube clock
  • Details     from Cube clock
  • Goals/plan:1. Find and purchase main components as cheap as possible.2. Hook a single display module up to a CPU on a breadboard.3. Get the display to display something.4. Write low-level library for addressing display.5. Hook up two more displays and...

  • Rotary dial mobile phone
  • Details     from Rotary dial mobile phone
  • Making GSM phone utilizing GSM modules is not that complicated. One needs to use MCU with UART and few IO lines and then truckload of patience for writing decent parser of AT commands - that can be nightmare to do correctly. For this construction, I...

  • Mini Laser Cutter
  • Details     from Mini Laser Cutter
  • This is basically my continued experimentation along the same sort of theme. So far I have completely rebuilt this thing far too many times :PThis is a fun project, and I hope more people try something like this.I used it to melt toner onto PCBs (https://hackaday.io/project/7535-cddvd-mechanisms-and-cartesian-thinggies/log/28947-pcb-fab)...

  • Animated Turn Signals
  • Details     from Animated Turn Signals
  • The controller is a PICAXE-14M which uses a ULN2803 darlington driver to drive the LEDs.On my car, there is no constant 12v supply to the tail lights, so I designed the circuit to operate in two modes. When the controller sees that the tail lights are...

  • Home security
  • Details     from Home security
  • This project should replace standard home security alarms, and And function as gateway to pass or receive data from various sensors. All configuration is done over nice web interface.Gateway board consists of atmega1284P that has inputs for sensors and...

  • Marauder's Map
  • Details     from Marauder's Map
  • Time for some technical details!Each "player tag" will be a small self powered PCB with a low power MSP430 and a TI CC2500 radio. These radios will broadcast small packets containing some basic information (Tag No., Player name, etc) that can be received...

  • Mini Altimeter
  • Details     from Mini Altimeter
  • Years ago, probably in 2004/2005, I built an altimeter, consisting of MPX4115A pressure sensor, MAX1241 ADC, PIC18F258 (don’t ask me why this one, instead of more common 18F252 without CAN interface), 2x16 LCD, DS1624 to measure temperature and EEPROM...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday