Close

362 Results for "『 모든문의 OIO=5793=7458 』 선릉셔츠룸㈄ 『 모든문의 OIO=5793=7458 』 Ηcake²셔츠룸테란강남셔츠룸デwriter 셔츠룸테란강남셔츠룸 선릉셔츠룸⒁셔츠룸사이즈┲exhausted⅔"

  • 1-D Laser-Ring Gyroscope
  • Details     from 1-D Laser-Ring Gyroscope
  • [A CLASS PROJECT.]+MATERIALS:- 1 aluminum mounting platform (the pizza pan!)- 12 Chicago screws- 2 FC/FC adapters- 1 plastic loop form or wheel for mounting the fiber optic cable- 1 100m single mode fiber optic cable with FC/UPC connectors- 1 1.3 um...

  • littleBits Stick Figure Costume
  • Details     from littleBits Stick Figure Costume
  • The light wire has been a crowd fave for our bitizens, using it to invent customized light-up costumes for years. Now we have a super easy way for everyone to make their own costume guaranteed to light up any costume party or trick-or-treating!To make...

  • Home made 3D printer
  • Details     from Home made 3D printer
  • here is a few close up of different sections of the printer mechanismThe slides for the Z axis are the printer guides from a couple of Dell Bubble jet printers. I just cut the cartridge holders off. The photo is a bit washed out but you can just make...

  • Borg Washing Machine
  • Details     from Borg Washing Machine
  • I recently acquired a second hand washing machine, and while all the mechanical bits (motor, tub and all rubber parts) were in good shape, the electrical system was not. Some switches were broken and the control timer started failing, causing interrupted...

  • Simple LCD Projector
  • Details     from Simple LCD Projector
  • Tips:1) Don't scratch the screen or polarizing filters2) Don't burn down the house3) Do not do this while the LCD is powered on4) Do not bend the LCD5) Do not squish the LCD6) Do not destroy the rubber conductor7) The LCD has to work after removing the...

  • Stirling Engine
  • Details     from Stirling Engine
  • The Unit is a beta type stirling configuration and it uses a rhombic drive to move the displacer and piston with a 90 degree phase relation. The first picture is a modified exercise bike with the flywheel moved to the pedal crank shaft. The gears are...

  • Bullseye
  • Details     from Bullseye
  • Shown below is our schematic. The STM32 is responsible for driving the motors, reading their encoder feedback, querying the GPS and IMU, driving the speaker (signal), listening for the go switch, and communicating with the PIC18F4321 which is responsible...

  • Traffic Counter - Road Tube
  • Details     from Traffic Counter - Road Tube
  • You know those black tubes on the road to count the traffic, those are actually quite easy to make. You just need a differential pressure sensor (+- 8$) , a rubber tube, and some kind of micro controller, I used an Arduino.A differential pressure sensor,...

  • B-BOT

  • Details     from B-BOT
  • This video shows the initial PID tuning and a simple adjustable tilt angle setpoint to induce forward and reverse motion. Still a lot of work to be done on tuning.Bread Boarding:First thing was to decide on components and breadboard everything to get...

  • Restyled Syma X5C Drone FPV Mod
  • Details     from Restyled Syma X5C Drone FPV Mod
  • Considering the painting, i love opaque black color combined to chrome yellow so the first thing i decided to do, was to repaint it.Considering the total weight of the drone for the FC40 addiction, i suggest to remove useless plastics combining all things...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday