8703 Results for "≡ 예약문의 OIO《⑧④89》83ⓞ⑥ ≡선릉드림레깅스룸☜드림레깅스룸dreary강남드림레깅스룸선릉드림선릉드림레깅스룸distinct 강남드림㈓ゲ선릉드림레깅스룸선릉드림summit"

6 Channel Voltmeter
Details from 6 Channel Voltmeter
Introduction Some special applications often have to measure the voltage from several parts at the same time for example electronics repair, scientific and experimental purposes.if you're building a battery pack it can also show the voltage of each cell...

Tiny Motion Detection Alarm
Details from Tiny Motion Detection Alarm
intro Hi, in this project we are going to make a motion detection alarm with IMU 6050, it is a 3-Axis Accelerometer and Gyro Sensor module. By using this, if small movement is detected by the IMU , it will trigger a sound in the buzzer . Basically it...

EvilDuck: From Innocent Duck to Cyber Weapon
Details from EvilDuck: From Innocent Duck to Cyber Weapon
🎯 Features It all started with a tiny board called Digispark, powered by something called ATtiny85. This little board has a cool trick up its sleeve – it can act like a keyboard or mouse when programmed right. I've seen similar...

Getting Started with the WeAct Studio CH5xx RISC-V
Details from Getting Started with the WeAct Studio CH5xx RISC-V
WCH has introduced a line of small RISC-V MCUs with USB and BLE. The 3 major branches of the family are the CH573, CH582 and CH592. They mostly only differ in the level of BLE - from 5.2 to 5.4. Looking for an inexpensive way to check...

Water Heater Automation
Details from Water Heater Automation
In South Africa, our electricity supply is somewhat erratic, due to around 2 decades of under-investment, and incredible levels of corruption. As a result, many residents have resorted to installing solar power, with battery backup to ride out the 2-4...

Drive Bay N100 mini PC HP Microserver Upgrade
Details from Drive Bay N100 mini PC HP Microserver Upgrade
The Intel N100 is a really cool, low power chip. With 4 of Intels latest Alder Lake 'E' cores it performs really well for such a low power CPU. It has a single channel of DDR5 RAM, which helps keep it low power as it would not really see a benefit from...

Automating Husqvarna Automower BLE
Details from Automating Husqvarna Automower BLE
Although some Automowers support a cloud connection, the 305 specifically doesn't include internet access. The 305 has no internet, WiFi or cloud connection. This means the manufacturer can’t enforce a subscription service, the device isn’t exposed to...

$10 wireless telescope pushto DSC
Details from $10 wireless telescope pushto DSC
For each axis, you'll need a Lolin32 lite ESP32 boarda AS5600 boarda radial magnetized magnetsome 3D printed partssome 2.5 mm pin connectors (male and female) AS5600 is connected to ESP32 : - SCL to pin 33 SDA to pin 27 - VCC to pin 17 // used...

DIY large dye sensitized solar cell
Details from DIY large dye sensitized solar cell
Manufacturing of Large Dye Sensitized Solar Cell at home from Shih Wei Chieh on Vimeo. Introduction Dye-sensitized solar cells (DSSCs) represent an easily manufacturable and cost-effective photovoltaic device and can be done at DIY level. However, its...

DIY Extremly Sensitive and cheap Geophone sensor
Details from DIY Extremly Sensitive and cheap Geophone sensor
A geophone is a device used in geophysics to detect ground movement. It is specifically designed to measure seismic waves, which are produced by various sources, including earthquakes, and explosions. Typically consist of a mass suspended on a...

Replacing micro USB with USB C the fun way!
Details from Replacing micro USB with USB C the fun way!
This is a mouse that I would love to use well into the future, but I don't want that future to include micro-USB. I took apart the mouse to see what I could do to replace the dated port and found that the space was too limited to just slap a different...

Low tech invisible automated window closer
Details from Low tech invisible automated window closer
I was looking for a solution to open and close the window when king Cat or queen Cat decided to go outside without me having to get up and open the window by myself. I first thought to motorize the window with something like a linear actuator or some...

Balancing Robot based on STM32
Details from Balancing Robot based on STM32
The purpose of the project is to design a balancing robot based on the STM32 MCU. On the web, you can find many guidelines on designing the balancing robots. Nevertheless, I always had a hard time finding clear and complete instructions. For example,...

Ambient OLED display re-use
Details from Ambient OLED display re-use
So far, I have cut away the back aly body, and exposed the driver boards, with hardly any damage.It looks like there are a bunch of driver IC's attached to the drivers, under what at first looked like kapton tape, but now appears to be some sort...

DIY Golf Launch Monitor
Details from DIY Golf Launch Monitor
Overview My personal goal has been to use this project as a learning platform for myself. So far, I’ve been able to explore all sorts of software and hardware that I hadn’t worked with previously. I’ve been kid-in-a-candy-store, getting to...

|<
<
577
578
579
580
581
>
>|