Close

8703 Results for "《〈 문의 OIO↗5793↗7458 》〉강남초원의집㉩⅓everythingァ강남유흥강남룸㏁evidently 강남초원의집강남더킹 강남더킹‡강남룸Ⅹfaintly㈆"

  • i3detroit
  • Details     from i3detroit
  • i3Detroit is a collaborative workspace in Ferndale, MI.Crafting, woodworking, metal working, electronics, welding, programming, and digital fabrication are just some of the activities that happen at i3Detroit.Build anything and everything you could possibly...

  • BeeStalker UsbLog
  • Details     from BeeStalker UsbLog
  • Some basic keyfacts:2 board design: 1 double sided PowerBoard and a 4 Layer PCB with a Compute Module 3 on itEverything is built do be modular. So you can easily exchange the Powerboard with an 5V regulator, connect your mouse, a keyboard and an USB-Graphics...

  • EZeeSample
  • Details     from EZeeSample
  • Initial ideas:Each slave will be equipped with a microphone and a speaker. Communication will be through a call/response sort of deal. I'll have to get some hardware built before I can experiment and figure out the best way to do this. I may need to...

  • Simple Temperature Monitor
  • Details     from Simple Temperature Monitor
  • This took about 1.5 hours today to build. I suck at soldering or it probably would have been faster. For influxdb and Grafana, I simply followed the instructions on the respective websites. I'm thinking I might add some calibration code to the ESP code...

  • 10S Balancer
  • Details     from 10S Balancer
  • This project came to life since we wanted to switch our Lead battery in our beer-box-cart to LiPo. And since im a purist, i of course want to make everything myself and buy as little as possible.You can use this circuit if you want but beware! The circuit...

  • Hackaday social media icon
  • Details     from Hackaday social media icon
  • Everyday we see many social icons on websites. When we have or website we also want to have that feature. Everything is fine when we want to add generic icons such: facebook, twitter, youtube and so on. But what if we want to have on our site some custom...

  • Open-Source 6-Axis Robotic Arm

  • Details     from Open-Source 6-Axis Robotic Arm
  • In some ways, this arm is pretty simple: it's just a bunch of joints driven by stepper motors. The basic design directly follows the PUMA architecture, and everything follows from there. There's just a lot of slow design work figuring out how to squeeze...

  • Model Rocket Data Logger
  • Details     from Model Rocket Data Logger
  • Electronics/HardwareAn ATMega328 microcontroller, with Arduino software, handles the communication between the different devices:MPU6050 AccelerometerBMP180 AltimeterSD Card ReaderRadio TransmitterNot represented in the above diagram are the two LEDs:...

  • 'Thor' robot with addons and GUI
  • Details     from 'Thor' robot with addons and GUI
  • This project is based on the THOR robotic arm project from AngelLM and will be a version with lots of add-ons and especially modified for a wide range of 3D printers with a smaller print area.Also it is my intention to improve a lot of things to the...

  • USB cable tester
  • Details     from USB cable tester
  • When I was in America pulling cables through pipes that were going underwater we shorted our usb cables and only realized that, when we plugged in everything. I want to be prepared for the next time and have some additional USB goodies with me - including...

  • Advantest r4131 AFC
  • Details     from Advantest r4131 AFC
  • I bought myself relatively cheap ~430USD working spectrum analyzer Advantest r4131c. With first inspection everything was excellent. However after little more investigation frequency readout was inaccurate and unstable. Something wrong with PLL i thought....

  • Picoammeter
  • Details     from Picoammeter
  • PLEASE NOTE : there is an oversight in my PCB design : DDC112 digital pins are 5V, and the TinyFPGA are 3.3V and are NOT 5V tolerant (it's a bit not clear on the internet, but the ICE40LP8K specs don't mention 5V anywhere). I'm just lucky my poor TinyFPGA...

  • SyncCarb
  • Details     from SyncCarb
  • I wanted to build something useful and have the chance to improve my IT/HW/mech abilities. The results are quite satisfying and could be improved playing with the SW. Started coding in Python because has immediate feedback (no compilation needed),...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday