This device was semifinalist of The Hackaday Prize contest ! - Link -Basically, this device acts as a wifi / ethernet router and access point. It could connect to the internet using some random wifi, a wired network, or a tethered android phone (wifi...
The automobile is a place where you are often cut off from your own data, especially while driving. Of course there is always the smartphone, but its integration with the automobile often amounts to just synchronizing your contacts with your car,...
he USB communication is achieved using the VUSB library from Objective Development that is wrapped in the VUSB for Arduino library. The USB hardware is based on a design from the book Practical Arduino and as all the hard work is being done in code is...
The project started out as a 555 timer based flyback driver. I wanted easier control of the frequency and duty cycle, so I decided an Arduino was needed. Normal Arduino PWM frequencies are far too slow for a flyback, so I used a library that...
OverviewDMX-84 is a hardware and software driver for TI-84 calculators to run DMX equipment such as DJ and theater lights. It is currently written as an Axe include program, but it may be rewritten as an Axiom in a later version. The driver requires...
VIDEO DEMONSTRATIONPLAYER REGISTRATIONThe table itself is just a normal soccer table usually seen in bars and game arcades.Most soccer tables comes with a coin insert, though we didn't want our users at the LAN event to pay. Instead we wanted them to...
V-Sink, takes the pain of driving many thousands of channels away, by appearing like a display to the OS and taking care of the rest. The current implementation can drive 32768 RGB LED pixels at 30Hz. I am currently working on a DMX driver. V-Sink should...
The general goal is to make a 'kit' of reusable components for wearables.Bluetooth BLE is the standard for communications. WiFi, etc. require too much power and anyone with a wearable likely has an Android or iOS phone. All wired connections are USB...
Original board removed from A/C. CON on far right of picture is the control box connection. ID, OD, RM, and OA are temperature sensor inputs either inline with it's respective coil (ID & OD) or air temp (RM & OA). Fur OFF/Fur ON and COOL/HP are option...
Arc Printer Design Document1INTRODUCTION1.1Purpose and ScopeThis document will describe the currently being developed Arc Printer in detail and provide information on what process I intend to follow in the developement of the Arc Printer.1.2Project Executive...
Author's Note: This writeup pertains to Pathfinder's "Milestone 1," which is my first really usable prototype that somewhat resembles a consumer device. I'm currently working on Milestone 2, which adds smarter haptic feedback and moves to a fully custom,...
The project will be build upon the following things:Some kind of MCU platform (not decided yet, most probably some ARM Cortex-M0 based one). This will provide the following functions:1. Receive the control signal from the LinuxCNC/Mach3 trough the CNC...
Planned featuresBelow is a list of features we plan to implement: monitor posting of new articles on hackaday.comprint weather forecasts automatically in the morning and on demandsignal new hackaday posts with lighting effectssignal new hackaday posts...