19067 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기た《〈 문의 OIO↗5793↗7458 》〉 ⑷plenty㎋셔츠룸후기셔츠룸후기んteeth 셔츠룸후기선릉셔츠룸 강남셔츠룸￦셔츠룸ⓤsilverⓞ"

Tiller Autopilot Limit Switches
Details from Tiller Autopilot Limit Switches
Adding limit switches to the ST1000 and ST2000 is a great way of preventing serious damage to these otherwise wonderful units. In my case the damage was already done. The motor had stripped the teeth of the toothed belt that drives the gears, and even...

Desert BRAT Microcamper
Details from Desert BRAT Microcamper
I've finally started this project, something I've been meaning to do for a while -- the BRAT has plenty of storage in the truck bed, but no place to sleep on road trips. Now that I've got a camper shell, time to fix that -- I know I can (and have) fit...

"Bolt Box", a Simple to Print But Hard to Solve 3D
Details from "Bolt Box", a Simple to Print But Hard to Solve 3D
"Bolt Box" is a 3D printed dual nut version of a single nut puzzle box I'd seen at craft shows over the years. A friend (and follower) asked if I could recreate the dual nut version (which is currently commercially available as "Nut Case") for 3D printing,...

3D Printed "Pegs And Jokers" Game.
Details from 3D Printed "Pegs And Jokers" Game.
Our kids, grandkids, nieces, nephews, etc. have recently become fascinated with the game "Pegs and Jokers", but not necessarily fascinated with the prices. So after seeing the simplicity of the game design, I decided to design and 3D print a less expensive...

Mechanum Robot - MAIXDUINO
Details from Mechanum Robot - MAIXDUINO
Purchased a cheap set of mechanum wheels and continuous servos. 3D printed servo holders to lock into a 4x6 proto board set for the chassis. 3D printed a case for the maxiduino.Basic controller is wired and seems to be functional. Need to work on combining...

Badly damaged Gameboy Advance game lives again!
Details from Badly damaged Gameboy Advance game lives again!
I was given this game after the previous owner damaged it while trying to reflow a chip in hopes of getting rid of intermittent saving issues. My guess is that the previous owner used too much pressure while sweeping the soldering iron across all...

Project Pipeline
Details from Project Pipeline
Project Pipeline aims to tackle water overuse and aims to promote water conservation. The device is small and battery powered. With Project Pipeline you can monitor water usage in real time, rather than waiting for your bill to arrive. Project Pipeline...

Q68030
Details from Q68030
The desired hardware configuration is:Quad 68030 CPUs with 68882 coprocessors4GB of RAM (LPDDR2?)RS232 console interface10/100Mbit ethernet Intel 27512 EPROMMicroSD storageThe hope is to run Linux / BSD.The biggest obstacles I see already are:My lack...

Lawnmower Robot
Details from Lawnmower Robot
The dimensions of the robotic lawnmower are 495x340x195 mm (length - width - height), is based on an Arduino Uno board with a shield made specifically for the control of the movement, the management of sensors and coils for the detection of buried wire,...

Autowinder for Pendulum clock
Details from Autowinder for Pendulum clock
Start by removing the weight and making the chain into a loop. The P2-Winder sits at the bottom the the chain loop. The chain lies in a toothed chain-wheel. A motor and gearbox can turn the wheel. The original clock weight hangs below...

Belt Lifted Z-Axis for a 3D Printer
Details from Belt Lifted Z-Axis for a 3D Printer
When I designed my latest coreXY 3D printer, Ultra MegaMax Dominator (UMMD), I wanted a tall Z axis but I didn't want any possibility of Z-wobble in the prints, usually caused by either bent or off-center lead screws. It took a few attempts, but...

Alien Operation (aka Alien Autopsy)
Details from Alien Operation (aka Alien Autopsy)
The initial idea was to make a life-size version of the actual game Operation. At the first meeting, however, an idea was proposed to keep the spirit of the original, but make it instead an alien autopsy, with the patient being an alien and the ailment...

Robot Building Kit and Development Environment
Details from Robot Building Kit and Development Environment
Open-Source Robot Building Kit and Development Environment The main products in this robot building kit are: 1) Ethernet Modules (PCBs) a) EthMotors - a Microchip PIC32 controls up to 12 motors (up to 2.8A each, using 12 Texas Instruments'...

Op Art
Details from Op Art
Introduction Op amps are well known for their utilitarian prowess, performing many vital tasks underpinning analog circuit design. They add, subtract, integrate, differentiate, and amplify with great precision! That’s all well and good…...

Project: Overkill | Custom Liquid Cooled Router
Details from Project: Overkill | Custom Liquid Cooled Router
I have designed this router and system to run a PFsense VM on ESXI hypervisor, using my laptop for SSH or on-network access along with a display attached as well.Please see: The updates and details for this project represent my experience making...

|<
<
2
3
4
5
6
>
>|